- 60 -
0800_GB-Wartung_1612
GB
MainTenance
Changing the filter
The red tip (50) indicates that the oil filter (F) is soiled.
The distance to which the tip is pushed out dependsd
on how soiled the filter is. When the tip shows maximum
soiling, the filter (F) is to be changed.
- Change hydraulic oil in accordance with tractor‘s
operating manual.
The electrical unit for the operation functions is protected
with a 10A fuse.
- The fuse is built into the -channel plug in the
electricity supply line
Safeguarding the electrical unit
The valve outputs in the job calculator are protected by
a 25 A fuse
- The fuse is built into the job calculator.
Note!
Disconnect
the electrical
connection to
the tractor when
working on the
electrical unit.
F
50
TD57/91/67
Oil pressure switch
Adjustment of oil pressure switch (): 220-20 bar
(Setting value depends on tractor hydraulics)
Setting procedure:
1. Carry out base setting according to scale (220-20
bar)
2. Load until silage pushes tailgate open approx. 2 –
cm
. When scraper floor is running, screw regulator (R)
out until wagon “FULL” indicator appears.
Note!
An exact setting can only be carried out using
a manometer
220 - 230 bar
