- 54 -
0800_GB-Wartung_1612
GB
MainTenance
Opening the side protectors
Open the locking
bar „R“ with a
suitable aid (e.g.
screw driver) and
simultaneously
swing the protector
up.
Closing the side protectors
Swing the protector down, the locking bar engages
automatically and locks the protector against
unintentional opening.
Take care when entering the
loading area
1. Use steps (10).
- open the latch (A)
- swing the steps (10) down
2. Access door
The access door in the left side wall must only be
opened when the drive motor is stopped (11).
. Do not enter the loading area when the p.t.o. is
connected and the drive motor is running.
4. Before starting the vehicle
- raise the steps (10).
- Secure locking device with linch pin
Safety points
• Do not work under the machine without safe
support.
Note!
When welding
on the trailer,
disconnect all
connections to
the tractor and
uncouple the
trailer.
Note!
A greater injury
danger exists
when working
behind opened
protective covers.
Gas container
Beware!
No welding, soldering or mechanical works
of any kind may be carried out on the
container.
Note
• According to manufacturer's information all gas
containers have a slight pressure drop after a certain
amount of time.
• The gas loss (nitrogen) amounts to 2- % per year.
• After 4-5 years it is recommended that container
pressure be checked and if necessary corrected.
Alteration of gas container pressure
This work may only be carried out by
customer service or a specialist.
• In order to reduce or increase the pressure in the
gas container a special filling and checking device
is necessary.
Overload clutch
Important!
The machine’s guarantee becomes invalid if the
set overload clutch torque is altered through
manipulation
Brake adjustment
See chapter "Brake unit"!
