- 25 -
0601-GB-DIREct-contRoL_563
GB
DirecT conTrol - oPeraTion
Loading functions
Raising pick-up
Press button and hold
(= touch function)
- pick-up is raised
- the integrated LED lights up
Note!
Key is also used to select the automatic
unloader
Adjustment process:
- The operating device is switched off in the starting
position
- Press and hold
key, then
Briefly press button
(2 secs.)
- The LED blinks and an acoustic sound signals the
status change.
Status is shown each time the operating device is
switched on.
- LED blinks briefly = switched on
- LED does not blink = switched off
Lower pick-up
Press button
(= rest function)
- pick-up is lowered
- Pick-up remains in the floating position
- the integrated LED lights up
The function can only be cancelled out using the “Raise
Pick-up” key
Note!
If actuating another function, the Pick-up function
is locked for this time period
- Loading functions are
always activated after
switching on
- The LED in the I/O key
glows red
- Only the red symbol
functions are active
- Select the required
hydraulic function
- The (LED) in the selected
key glows red
Safety hints!
See the relevant
chapters in this
operating manual!
Scraper floor back run
Press button and hold
(= touch function)
- the scraper floor moves at maximum speed towards
the tailgate
- the integrated LED lights up
- the scraper floor remains still after releasing the
key
Note!
Key is also used to select the automatic
loader
1)
Adjustment process:
- The operating device is switched off in the starting
position
- Press and hold
key, then
Briefly press button
(2 secs.)
- The LED blinks and an acoustic sound signals the
status change.
Status is shown each time the operating device is
switched on.
- LED blinks briefly = switched on
- LED does not blink = switched off
Swing cutting unit in
Press button and hold
(= touch function)
- Cutting unit is swung in under pressure
Swing cutting unit out
Press button and hold
(= touch function)
- cutting mechanism is swivelled out
With the cutting unit sensor available (as option) the
LED signals the swung out status
- Signal tone when Pick-up is lowered
Note!
For automatic loader and unloader see chapter
“Automatic Loading and Loading”.
1)
Only if loading gates are available
