- 20 -
0400_GB-Rückwand_5543
GB
TailgaTe
Safety mechanism
The tailgate’s own weight is used to lower it to position
C. No other pressure is used.
Only when in this position (C) is the hydraulic func-
tion activated through switch (56) and the tailgate is
closed under pressure.
Unloading using dispensing rollers
Variations
1. Standard dispensing
• Rear steel section fixed to swivel frame
- secure with linch pin (F) (left and right)
2. Fine dispensing
• Rear steel section fixed to side walls
- secure with spring pin (F) (left and right)
The forage falls evenly distributed to the ground as with
standard dispensing
Warning against damage
• The bolts on the left and right hand trailer sides
must always be equally positioned otherwise the
tailgate and swivel sections will be damaged
therefore
- always check before
opening the tailgate
hydraulically
Attention!
Nobody should
be within the
swinging range
of the tail gate
when opening and
closing!
Do not stand
underneath the
raised tail gate!
Travelling on public
roads must only
be undertaken
with the tailgate
closed!
With all of these switching procedures, be
alert to the danger distances!
An example:
Danger of injury arises if a person stands
at the rear of the trailer and somebody in
the tractor cabin activates a switching
function (opening the tailgate, switch on
the driving gear, ...).
