- 33 -
1500-GB-WARTUNG_3672
MAINTENANCE AND REPAIRS
GB
Changing the mowing blades
1. Place the cutting bar in headland position
2. Insert the blade wrench (29) in the gap between
the floor plate and the drum, as shown in the
illustration.
29
Make sure that the blade wrench edge lies on
the upper drum edge.
Then push the blade wrench (29) upward
and with that the blade holder (30) moves
downward.
- The blade (M) is suspended on the bolt (31).
3. Remove the mowing blade (14).
4. Remove fodder residue and dirt
- from around the bolt (31).
Holder for the rapid change of mowing
blades
Be advised!
For your safety
- Check the mowing blades and their fastenings regularly!
- The mowing blades on a mowing disc must wear
equally (imbalance).
Otherwise they must be replaced with new ones
(change pairwise)
- Discontinue further use of bent or damaged blades.
• Bent, damaged and/or worn blade brackets (30) may
not be used further.
Mowing blades suspension checks
- Normal check every 50 hours.
- Check more often when mowing on stony terrain or in
any other difficult operating conditions.
- Immediately check after driving over a solid obstacle
(e.g. stone, wood piece, …).
Checkingl procedure
- as described under chapter "Changing the Mowing
blades"
Be advised!
Damaged, deformed, extremely worn parts
must not be used further (accident hazard).
