- 24 -
1500-GB AUFBEREITER_3672
GB
CONDITIONER
(CONDITIONER)
Mowing with the conditioner
The conditioner effect can be modified.
- Using the hand lever (13), adjust the distance between
the conditioner flap and the rotor.
Conditioning is strongest in the top position (pos. 3)
However, the fodder must not be beaten.
13
3
Correct V-belt tension
The tip of the marking (1) must be flush with the shim,
then the belt tension is correct.
1
Rotor tines position
Pos. Z1: Rotor tines position for normal operating conditions.
Pos. Z2: For difficult operating conditions, e.g. if the fodder
winds around the rotor.
Turn the rotor tines 180° (pos.Z2). This tine position solves
the problem in most cases. However, the conditioning effect
is thereby somewhat reduced.
Maintenance of the rotor tines:
1. Replacing tine fastening
If signs of severe wear on the tine fastening are discovered,
the affected component(s) must be changed. (tines, screw,
spring dowel pin ...)
