- 56 -
0701_GB-ISoBUS-Terminal_5543
GB
isobus - TerMinal
Starting from
Start Menu
- Press
button 6
With that the
Set Menu
is reached
Set menu
Note!
An altered
setting must be
confirmed with
the OK key.
6
1
2
5
4
7
a
b
c
6
Button indication:
1 STOP
2 Scraper floor adjustment
phase 1
Switch to another mask
3 Scraper floor adjustment
phase 19
Switch to another mask
4 TEST functions
Switch to TEST menu
5 DIAG functions
Switch to DIAG menu
6 Increase scraper floor speed
7 Reduce scraper floor speed
Further adjustments can be made in the
SET menu
:
a
Trailing front axle
b
Loading and unloading instant
c
Scraper floor lead time for automatic unloading
Note!
Before initial
use of the
control several
adjustments
must be made
to enable proper
functioning.
Speed
Trailing axle stand
km/h less
Locked
Negative (reverse)
Locked
km/h greater and
lower set
Opened
Greater set value
Locked
The speed signal can be assumed by the ISObus-tractor
or alternatively via the auxiliary cable from the tractor
(see Tractor Data Usage).
- Select
hAND
or
AUTO
(matic) operating mode
hand operation:
In the base settings menu, the trailing front axle is
- opened (symbol
flashes black) or
- closed (symbol white)
with the
key.
Automatic operation:
The trailing front axle is controlled automatically
depending on speed.
The set rate of speed determines the upper limit.
Adjustable values: Between 10 and 20 km/h
Take note!
The trailing front axle is automatically
locked when tailgate is open also.
Attention!
The trailing forward axle must be locked
- when travelling straight ahead quickly at
30 km/h or more
- with unpaved surfaces
- in sloped areas
- with load on the front axle through pivoting
drawbar usage
- when travelling over a drive-in silo
- when lateral traction of the unguided axle
is no longer sufficient
1. Trailing front axle
