(362) 9700-GB EINSATZ
- 13 -
PUTTING INTO OPERATION
1)
optional equipment
GB
2
1
11a
TD 69-97-02
M10 x 30
M8 x 25
8,5 / 18 x 2
Si
Si
8,5 / 18 x 2
M8 x 25
GW
Install Swathformer
If a conditioner is not attached to
the mower unit then the swath
former can be attached for
mowing.
The swath former is fixed to the
same holding brackets as the
conditioner (11a = left and right
spring pin).
Fit guiding plates
- left (1) and right (2)
Si = Lock nut
Remove Swath Former
Saftey advice
• Danger of injury exists through the unitentional
starting of the p.t.o.
Therefore it is imperitive that the drive shaft (GW) be
removed before starting to remove the swath
former.
Swath Discs
(not for
CAT NOVA 260
front
)
Setting both rubber discs
•
The gap between swath drum and rubber disc should be 20 mm.
-
Position the console in the relative slots
-
Tighten screws (SK)
Mower with Swath Drums
1)
Setting
A = for high dense forage
B = basic setting
C = for short forage
TD69/97/01
GW