GB
DAMPED STEERING MECHANISM
(optional equipment)
- 5
.3
-
9500-GB FOL (342)
5. Remove mounting bracket and
fit in position "B".
• Secure mounting bracket with
spring clip (F).
6. Lower hydraulically (FL).
7. Check
• Raise mechanism laterally, approx. 50 kg
• Raise mechanism at front, tipping towards the rear must be
easily possible.
Problems which may arise during
operation and their correction
TD10/95/8
B
F
TD40/94/7
Adjustment of the damped steering
mechanism (DSM)
1. Fit the mechanism to the towing vehicle (see pages 4, 5).
2. Carry out adjustment of the damped steering mechanism on an a
level surface (FL).
• Unhook both balance springs.
• The bracket must be set in position
"A".
• Adjust length (L) by rotating the
spindle.
• Set the damped steering
mechanism at the towing vehicle
and the quick-release coupling (Weiste triangle).
3. Raise the mechanism hydraulically (H1).
4. Fit balance springs.
• The set distance should be 42 cm (see above).
TD40/94/6
42 cm
( L )
FL
TD10/95/7
A
F
TD10/95/10
H1
Function of the damped steering mechanism
• The damped steering should be used when
operating on uneven terrain.
The advantages:
- the mower unit adapts especially well to suit the
terrain
- better mowing performance
- less loading and wear and tear on moving parts
Problem
• The mower unit digs into
the ground, the springing
on the DSM is too weak.
• Double cut, the springing
on the DSM is too strong.
Remedy
- Attach to hole higher up the
Weiste triangle.
- Readjust the length (L) (see
Points 2 - 7).
- Attach DSM to a hole down
the Weiste triangle.
- Readjust the length (L) (see
Points 2 - 7).
TD10/95/11
TD10/95/11a
TD10/95/12
TD10/95/12