- 25 -
GB
9500_GB-DÜRRfuTTERAufBAu_511
DrY forage extension
mechanical adjustment
• Instead of the mechanical adjusting unit the trailer can
also be fitted with a hydraulic one (see the relevant
chapter in this operating manual).
Folding dry forage extension up/down
1. Unlock right support strut (rS).
2. Attach tailgate raising lever (A) to dry forage exten-
sion.
3. Unlock left support strut (LS) while holding lever (A)
firmly.
Take care!
The dry forage extension can fold together
itself a little under its own weight. Be aware of
lever's (A) and support strut's jib range.
4. Always hold lever (A) firmly when adjusting and
manoeuvre extension slowly!
5. Secure left support strut (LS) first, then right support
strut (rS).
. Detach lever (A).
D = Dry forage position
G = Dried silage and green forage position
Sliding plates (56)
-
With low entrances it may be necessary to remove both sliding
plates (5).
Top ropes
- When loading chaff, remove top ropes.
Safety tip
Adjusting the relieving spring
The operating force on lever (A) should not exceed 25 kp
(245 N).
From there adjust the relieving spring tension (Z) accordingly.
D
G
TD3/1/12
56
TD1//35a
TD5//7
Z
LS
max.
25 kp
A
