GB
eleCtrohYDrauliC Comfort oPeration
- 21 -
9500-GB ELEK.Hyd.KOmf. (511)
Functions
Pick-up switch (19)
- Pushed down (B) - pick-up drops and
remains in floating position.
- Pushed up (A) - pick-up rises (feed
and pick-up drive stop automatical-
ly).
Caution!
If the lever (43) is in the "ON" position then the
loading unit and Pick-up drive will automatically
switch on when lowering.
Therefore always stay at a safe distance if the
drive shaft is coupled to the tractor and the
p.t.o. drive is switched on.
Hydraulic drawbar switch (26)
- Pushed up (A) - drawbar rises.
- Pushed down (B) - drawbar drops.
On the road hydraulic drawbar cylinder must be completely
retracted.
Rear gate lifting switch (15)
- Switch (15) pushed up (A) - rear gate is released and
opened.
- Switch (27) pushed down (B) - rear
gate is lowered.
Persons to leave pivoting
area!
Attention!
While lowering switch stays turned on. After locking
rear gate switch has to be brought to position "0".
Scraper floor drive push-button front (16) and rear
(32)
- When pressing push-
button (32/1) it re-
mains in position (C)
and moving floor drive
is turned on.
Integrated control
lamp (1) at front
control panel lights
up.
- Pressing the push-button again turns off the moving floor
drive (D).
• The control lamp in push-button (1) must go out.
If the control lamp remains lit up nevertheless, then the
second push-button (32) is still depressed and the scraper
floor is still operating!
General hints
Selecting another function in addition to the moving
floor feed will automatically interrupt the moving
floor feed.
