manualshive.com logo in svg

Potterton Paramount four, Installation Manual, Page: 138 / 144

Share
Download
Potterton Paramount four Installation Manual Download Page 138

12  Disposal

12.1  Disposal/recycling

12.1.1 Packaging

As part of the packaging regulations, Potterton Commercial provides local 

disposal facilities for the specialist company to ensure correct recycling of 

all the packaging. In order to protect the environment, the packaging is 

100% recyclable. 

See

Please follow the legal requirements applicable to disposal in your 

country.

12.1.2 Appliance disposal

The appliance can be returned to Potterton Commercial for disposal via a 

specialist company. The manufacturer undertakes to recycle the appliance 

correctly.

Note

The appliance is recycled by a disposal company. If possible, the 

materials, especially the plastics, are identified. This enables cor­

rect sorting for recycling.

12 Disposal

138

Paramount four 30 – 115 kW

7658013 - 02 - 15092016

Summary of Contents for Paramount four

















































































































































Reviews:

No comments