Potterton NXR5i, Assembly Instructions Manual, Page: 15 / 60

15
25/09/2012 - 300029104-001-02 NXR5i
14
Rear
Front
` Put in place the upper assembly rods in the two front and rear lugs.
` Mount the 2 crosspieces (supplied in package MR338/MR339) with their bends turned backwards and fasten them to the rods with an
expansion spring, 1 nut and 1 washer
` Remove the assembly tool.
Assembling the side assembly rods
The side assembly rods must be assembled from the rear to the front.
The rods must be inserted in the holes stated in the diagrams (the lugs of the sections in which the assembly rods are to be
inserted have 2 holes).
` Place the expansion spring and washer on the rear of each rod.
` Stop tightening the nuts as soon as the gap between the spires of the springs is about 1 mm.
00069 M0
2
2
2 1