IP410G and IP410C - User Manual
27
Basic Network Setting
Positron IP Phone supports three mode of Network: DHCP, Static, and PPPoE. The default mode is DHCP; it
will obtain IP address and other information automatically.
If your phone cannot contact a DHCP server for any reason, you need to configure a static IP address
manually.
When switch DHCP, Static IP and PPPoE to each other, or change the Static IP on webpage, it will show the
warning of restart as following.
WAN Port
To configure a static IP address via phone interface:
1.
Press Menu
Setting
Advanced Settings (password: admin)
Network
WAN Port Static mode.
2.
Enter the parameters: IP, Netmask, Gateway, Pri. DNS (primary DNS), sec. DNS (second DNS) in the
corresponding fields.
3.
Click Save and restart the phone.