BRX Power Injector Installation Guide
16
180-0192-001-R01
3.2 Grounding the BRX Power Injector
For safety and proper operation of the BRX Power Injector, it is important to connect a solid ground
wire (6 to 10 AWG) to the grounding lug of the BRX Power Injector enclosure.
Step 1:
attach the grounding lug to the ground
wire. You should use wire gauge of at least 10
AWG and up to 6 AWG.
Step 2:
Use the lock washer and nut pre-installed
on the grounding post of the BRX Power Injector.
Step 3:
insert the grounding luck, the lock washer
and the nut on the grounding post of the BRX
Power Injector to secure the grounding wire in
place.
Step 4:
make sure the ground wire connects to a
solid ground as per local regulations and your
company guidelines.
Table 5: Grounding the BRX Power Injector
