Manual Kit Control Box with GUI
Page 17
Version: 2020-09-10
MANUAL
KIT CONTROL BOX WITH GUI
2.10 Read Position
Continuous position reading can be performed with
the function “Read Position”. This option is only
supported after 2.0.0. release of the Kit Control Box Software.
To open the read position window, activate the button “Start Position Reading”.
Figure 19: Read Position window
The position read out is possible with different resolution. The default value is 16 Bit Multiturn and 17 Bit
Singleturn. If you have a
Kit Encoder with this resolution, you can simply press the “Start” Button. If you have
an encoder with
different resolution values, you can change this under “Settings”.
