Page 1 / 2
SD400 Series
UPGRADE KIT
USER’S MANUAL
Rev. : Original
I. FEATURES
Optical Finger Print Sensor in USB interface
Industry's most accurate fingerprint algorithm
ISO 7811 Magnetic Stripe Reader in USB full speed HID interface
Options for MSR heads covering 1&2 and all 3 tracks
3 tracks type MSR can read also AAMVA and CA DMV card
Total power consumption: 300 mA @ 5V DC
Upgrade kit for fanless touch terminals Jiva KS series and provides external access to
audio ports of Jiva KS series
.
FCC NOTICE
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual,
may cause interference to radio communications. It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part
15 of FCC Rules, which are designed to provide reasonable protection against interference when operated in a commercial environment. Operation of this
equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures to correct
the interference.
WARRANTY LIMITS
Warranty will terminate automatically when the equipment is opened by any person other than the authorized technicians. The user should consult
his/her dealer for the problem happened. Warranty voids if the user does not follow the instructions in application of this merchandise. The manufacturer is by
no means responsible for any damage or hazard caused by improper application.
The hardware utility program, including instructions for its use, is provided “AS IS” without warranty of any kind. Posiflex Inc. further disclaims all
implied warranties including without limitation any implied warranties of merchantability or of fitness for a particular purpose. the entire risk arising out of the
use or performance of the software and documentation remains with you.
ABOUT THIS MANUAL
This manual is written in an attempt with full strength to assist the user to utilize the upgrade kit SD400 for the Posiflex fanless touch
terminals Jiva
KS
systems. This series of products incorporate 2 delicately designed POS peripherals each can be used as an excellent tool to accommodate the required
security specially involved in POS business, kiosk and hospitality operation. This manual covers the conceptual and operational aspects of these units. For
technical aspects involving opening of the unit or option implementation, it is only available to the authorized distributors.
The manufacturer of the SD400 series heartily apologizes to the user for reserving the right to change or to modify this manual without notice due to
the rapid and constant progress and improvement on science and technology. The user may always obtain the most up to date information through any of our
web sites: http://www.posiflex.com or http://www.posiflex.com.tw.
Copyright Posiflex Inc. 2006
All rights are strictly reserved. No part of this documentation may be reproduced, stored in a retrieval system, or transmitted in any form or by any
means, electronic, mechanical, photocopying, or otherwise, without the prior written consent of Posiflex Inc. the publisher of this documentation
TRADE MARKS AND SERVICE MARKS
POSIFLEX is a registered trademark of Posiflex Inc., an ISO-9001 and ISO-14001 certified manufacturer.
Other brand and product names are trademarks and registered trademarks and service marks of their respective owners.
II. INSTALLATION
1. HARDWARE
INSTALLATION
For SD400 series ordered with the host system KS series, it is installed on the system at
delivery. For separately ordered SD400 series, it is delivered separately from the system and
needs to be fixed onto the system per following instructions before use.
You may find two screw holes on back of the right side of the main
unit of Jiva KS series. Remove these 2 screws to remove the cover for side
mount upgrade kit. Take out the cable inside this cover as circled in right
picture and remove the 2 shorting jumpers inside and then connect it to
connector inside the side mount upgrade kit SD400 as arrowed in same
picture. Gently arrange the excessive length of this cable back in the hole
and screw-fit it back to the position originally occupied by the cover.
Please reserve the cover if there is chance to have the side mount kit removed in the future.
2. DRIVER
INSTALLATION
1.
For Finger Print Sensor:
To include the drivers for this sensor to perform finger print
registration or verification (authentication) in an AP requires the software programmer to
purchase and utilize its SDK (software developer’s kit). However, Posiflex delivers this
optical finger print sensor with its drivers. Please find in the mini CD delivered with SD400
or Product Information CD delivered with Posiflex POS system the folder for “Posiflex
Optical Finger Print Sensor” or download the installation program from our web
http://www.posiflex.com or http://www.posiflex.com.tw.
2.
For MSR:
The magnetic stripe reader in SD400, no matter how many tracks are in the
reader head, connects to the host through USB port working as a USB KB and therefore
requires no driver installation except setting up the USB keyboard to be enabled in system
CMOS setup if the OS does not do it automatically. Refer to “Operation Guide” for
manipulation over the reader configuration.
P/N: 19800900010
警告使用者
這是甲類的資訊產品，在居住的環
境 中 使 用 時 ， 可 能 會 造 成 射 頻 干
擾，在這種情況下，使用者會被要
求採取某些適當的對策。
T31454
