background image

 

P/N: 19050900020 

1

LM6100 Series 

LCD Monitor 

USER’S MANUAL 

Rev. : A 

 

I. 

FEATURES 

• 

Light weight and high luminance LCD monitor for industrial and commercial use 

• 

Application covers POS, POIS (Kiosk), Factory Automation etc. 

• 

High quality 12.1” TFT LCD panel with scaling up function for full screen display 

• 

Successor from earlier LM6000 series and supports display resolution up to 1024 x 

768 pixels 

• 

Tilt and swivel adjustable construction 

• 

Spill proof and easy maintenance structure allowing easy cleaning 

 

FCC NOTICE

 

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in 

accordance with the instructions manual, may cause interference to radio communications. It has been tested and found to 
comply with limits for a Class A digital device  pursuant to subpart J of Part 15 of FCC Rules, which are designed to 
provide reasonable protection against interference when operated in a commercial environment. Operation of this 
equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to 
take whatever measures to correct the interference. 

WARRANTY LIMITS  

Warranty will terminate automatically when the machine is opened by any person other than the authorized 

technicians. The user should consult his/her dealer for the problem happened. Warranty voids if the user does not follow 
the instructions in application of this merchandise. The manufacturer is by no means responsible for any damage or 
hazard caused by improper application. 

ABOUT THIS MANUAL

 

This manual assists the user to utilize the LCD Monitor LM6100 series. These series provide versatile font 

formats and support various instruction sets. These series of products receive instructions in serial communication 
protocols and is capable of entering pass through mode so that all instructions received pass on to next connected serial 
device if properly configured. 

The manufacturer of the LM6100 series heartily apologizes to the user for reserving the right to change or to 

modify this manual without notice due to the rapid and constant progress and improvement on science and technology. 
The user may always obtain the most up to date information through any of our web sites: http://www.posiflex.com.tw, 
http: //www.posiflexuk.com, http://www.posif lexusa.com. 

 Copyright Mustek Corp. 2002, 2003 

TRADE MARKS AND SERVICE MARKS  

POSIFLEX is a registered trademark of Mustek Corp.. 
Other brand and product names are trademarks and registered trademarks and service marks of their respective 

owners. 

Summary of Contents for LM-6100 Series









Reviews: