background image

SOME IMPORTANT NOTES

FCC NOTES

This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions manual, may cause interference to radio communications. It

has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part

15 of FCC Rules, which are designed to provide reasonable protection against interference when

operated in a commercial environment. Operation of this equipment in a residential area is likely to cause

interference in which case the user at his own expense will be required to take whatever measures to

correct the interference.

WARRANTY LIMITS

Warranty will terminate automatically when the machine is opened by any person other than

the authorized technicians. The user should consult his/her dealer for the problem happened. Warranty

voids if the user does not follow the instructions in application of this merchandise. The manufacturer is

by no means responsible for any damage or hazard caused by improper application.

ABOUT THIS MANUAL

This manual is written in an attempt with full strength to assist the user to utilize the

powerful programmable keyboard KB-3200 series which consists of a 6 positioned electronic control key

and 136 press keys which provides excellent tactile click when pressed, and an optional magnetic stripe

reader for either ISO or JIS standards. The KB-3200 series not only is capable of being programmed to

transmit whatever code a standard PC or PS2 keyboard can deliver, but also provides a great variety of

programmability such that contains all capabilities of the most modern programmable keyboards.

The manufacturer of this product heartily apologizes to the user for reserving the right to

change or to modify this manual without notice due to the rapid and constant progress and improvement

on science and technology.

©

 Copyright Mustek Corp. 1999

All rights are strictly reserved. No part of this documentation may be reproduced, stored in a retrieval

system, or transmitted in any form or by any means, electronic, mechanical, photocopying, or otherwise,

without the prior written consent of Mustek Corp. the publisher of this documentation.

TRADE MARKS AND SERVICE MARKS

POSIFLEX is a registered trademark of Mustek Corp..

Other brand and product names are trademarks and registered trademarks and service marks

of their respective owners.

Summary of Contents for KB3200 Series



































Reviews: