work as if pressing a Change Level Key with three markers and the multi-
level programmed key together. The fourth level of the multi-level
programmed key will come out in either methods above. Through such
approach, one can utilize a multi-level programmed key with more than
eight levels program. (Pressing a Change Level Key with seven markers
and a Change Level Key with one marker together with the multi-level
programmed key will give the ninth level) However be as such usage of
too many levels could confusing, this approach is not recommended.
To program a Cap Lock key
This features adds a true Cap Lock function to the keypad.
1. Start
the
KBM.EXE
utility program.
2. Select the key which will become the Cap Lock key. Press ALT + A to
enter the
ASCII
code mode.
3. Press
ALT
and
C
together.
SPECIAL CONFIGURATION
Special configuration is accessed through
F3
for the configuration menu. The
following options are available:
a.
Send Break-Codes for Scan-Code:
YES
b.
Beep while a key is pressed:
YES
c.
Beep if a key is undefined:
NO
f
.
Use ALT + num to generate
ASCII
codes:
YES
j/k
. Change InterCharacter Delay (ms):
4
l.
Enable
RS232
output:
NO
(m. Baud Rate:
9600
)
(n. Parity:
NONE
)
(o. Data bits:
8
)
Press ESC to return, or the first letter to change the setting.
In the configuration screen, pressing the correspondent letter of the
“YES” “NO” settings will toggle the setting. Pressing the “J” key each time will
KB2100 Series User’s Manual
12
