6
6.
Before pushing the cover back into
place, neatly thread the cables
through the cable exit.
7.
Press down the cover to close the
bottom I/O interface chamber.
Installing a Customer Display to HS-2410W/2410A
HS-2410 series also allows you to additionally install a customer
display to expand its functionality. Based on the model of the second
display, the step-by-step instructions are provided in its own user guide
to help you mount it onto your POS system. Please refer to the relevant
user manual for detailed information.
Mounting the POS onto a Table
To facilitate your operation of HS-2410 series, desktop mounting kits
allow you to fix the POS firmly onto a table in preventing your machine
from being rocked, tipped or tilted accidentally. Please follow the steps
below to mount the POS.
1.
Determine where the HS-2410W/2410A desktop POS is
mounted.
2.
Take the desktop mounting bracket out of the kit pack and place
it in place depending on your preferred mounting position.
Through two screw holes on the bracket, drill two holes on the
surface and plug the drilled holes with 2 plastic anchors from
the same kits. Then, while holding the bracket, insert two self-
tapping screws into the holes to secure it.
Cable Exit
