POSI LOCK ATN-1 Instruction Sheet Download Page 1

Page: 1 / 2

etric

orizontal

lignMent

ool

Instruction Sheet

Instructions:

1. Loosen securing bolts (or stud bolt nuts) approximately one full turn.
2. Place alignment tool and eccentric socket over bolt head with

reference mark on eccentric socket toward knurled nut.

3. Tighten knurled nut so contact is made between foot edge and allen

screw.

4. Rotate the eccentric socket one-half turn or until desired position has

been reached.

5. Repeat steps 2, 3 and 4 as necessary to achieve desired alignment.

Precise coupling end gap adjustment and horizontal adjustment is made

easy by using POSI LOCK Horizontal Alignment Tool.

ALWAYS READ THE MANUFACTURER’S INSTRUCTIONS BEFORE

PRODUCT USE.

To view our horizontal alignment tool set product video, please visit our YouTube channel at: www.youtube.com/thecageisthekey.

Posi Lock Puller, Inc.

PO Box 246

805 Sunflower Avenue

Cooperstown, North Dakota

USA

58425

Phone: 1-701-797-2600

Toll Free: 1-800-533-5761

Fax: 1-701-797-2706

www.posilock.com

Summary of Contents for ATN-1

Page 1: ...d position has been reached 5 Repeat steps 2 3 and 4 as necessary to achieve desired alignment Precise coupling end gap adjustment and horizontal adjustment is made easy by using POSI LOCK Horizontal...

Page 2: ...01 N 201 N 301 N 401 N 501 2 Adjustment Shaft N 103 N 103 N 303 N 403 N 503 3 Allen Screw N 104 N 104 N 304 N 404 N 504 4 Adjustment Plate N 105 N 105 N 305 N 405 N 505 5 Knurled Nut N 106 N 106 N 306...