1234123413
1234123413
YJ4600
Corded Area-Imaging Scanner
Quick Start Guide
YJ4600-QS Rev A
6/12
Note: Refer to your user’s guide for information about cleaning your
device.
For localized language versions of this document, go to
www.youjieaidc.com
.
Getting Started
Turn computer’s power before connecting the scanner, then
power up the computer once the scanner is fully connected.
Power Supply Assembly (if included)
Connecting the Scanner
USB:
Keyboard Wedge:
Reading Techniques
The view nder projects an aiming
beam that should be centered over the
bar code, but it can be positioned in any
direction for a good read.
Hold the scanner over the bar code,
press the button, and center the aiming
beam on the bar code.
The aiming beam is smaller when the
scanner is closer to the code and larger
when it is farther from the code. Hold
the scanner close to smaller bar codes,
and farther away from large bar codes
to get a proper read.
If the bar code is highly re ective (e.g., laminated), you may need to
tilt the scanner at an angle so the bar code can be scanned.
Standard Product Defaults
The following bar code resets all standard product default settings.
Keyboard Country
Scan the
Program Keyboard Country
bar code below, then scan
the numeric bar code(s) from
page 2
, then the
Save
bar code to
program the keyboard for your country. As a general rule, the
following characters are not supported by the scanner for countries
other than the United States:
@ | $ # { } [ ] = / ‘ \ < > ~
Note: For a complete list of country codes, see the User’s Guide for
your product at our website,
www.youjieaidc.com.
Country Code
Scan
Country Code
Scan
Brazil
16
Turkey F
27
Brazil (MS)
59
Turkey Q
24
Russian
26
Poland
20
Russian (MS)
67
Latin America
14
Russian
(Typewriter)
68
USA (Default)
0
Standard Product Defaults
Program Keyboard Country
Save
Trigger
The following bar codes will allow you to use the scanner in Manual
Trigger - Normal Mode (need to press the button to read) or
Presentation mode (the scanner is activated when it “sees” a bar
code).
Su x
If you want a carriage return after the bar code, scan the
Add CR
bar code
. To add a tab after the bar code, scan the
Add Tab
bar code. Otherwise, scan the
Remove Su
bar code to
remove the su xes.
Manual Trigger - Normal
(Default)
Presentation Mode
Add CR Su x
Remove Su x
Add Tab Su x
Add Code ID Pre to all Symbologies
Scan the following bar code if you wish to add a Code ID pre x to all
symbologies at once.
Note: For a complete list of Code IDs, see the User’s Guide for your
product at our website,
www.youjieaidc.com.
Function Code Transmit
When this selection is enabled and function codes are contained
within the scanned data, the scanner transmits the function code to
the terminal. Charts of these function codes are provided in your
User’s Guide. When the scanner is in keyboard wedge mode, the
scan code is converted to a key code before it is transmitted.
Add Code ID Pre x To All Symbologies
(Temporary)
Enable
(Default)
Disable
Programming the Interface
Scan one of the following bar codes to program your interface.
USB IBM SurePos
(USB Handheld Scanner)
Interface
Keyboard Wedge
IBM PC AT and Compatibles with
CR su x
USB Keyboard (PC)
USB IBM SurePos
(USB Tabletop Scanner)
Interface
USB Keyboard (Mac)
USB Japanese Keyboard (PC)
USB HID Bar Code Scanner
YJ4600
Corded Area-Imaging Scanner
Quick Start Guide
YJ4600-QS Rev A
6/12
Note: Refer to your user’s guide for information about cleaning your
device.
For localized language versions of this document, go to
www.youjieaidc.com
.
Getting Started
Turn computer’s power before connecting the scanner, then
power up the computer once the scanner is fully connected.
Power Supply Assembly (if included)
Connecting the Scanner
USB:
Keyboard Wedge:
Reading Techniques
The view nder projects an aiming
beam that should be centered over the
bar code, but it can be positioned in any
direction for a good read.
Hold the scanner over the bar code,
press the button, and center the aiming
beam on the bar code.
The aiming beam is smaller when the
scanner is closer to the code and larger
when it is farther from the code. Hold
the scanner close to smaller bar codes,
and farther away from large bar codes
to get a proper read.
If the bar code is highly re ective (e.g., laminated), you may need to
tilt the scanner at an angle so the bar code can be scanned.
Standard Product Defaults
The following bar code resets all standard product default settings.
Keyboard Country
Scan the
Program Keyboard Country
bar code below, then scan
the numeric bar code(s) from
page 2
, then the
Save
bar code to
program the keyboard for your country. As a general rule, the
following characters are not supported by the scanner for countries
other than the United States:
@ | $ # { } [ ] = / ‘ \ < > ~
Note: For a complete list of country codes, see the User’s Guide for
your product at our website,
www.youjieaidc.com.
Country Code
Scan
Country Code
Scan
Brazil
16
Turkey F
27
Brazil (MS)
59
Turkey Q
24
Russian
26
Poland
20
Russian (MS)
67
Latin America
14
Russian
(Typewriter)
68
USA (Default)
0
Standard Product Defaults
Program Keyboard Country
Save
Trigger
The following bar codes will allow you to use the scanner in Manual
Trigger - Normal Mode (need to press the button to read) or
Presentation mode (the scanner is activated when it “sees” a bar
code).
Su x
If you want a carriage return after the bar code, scan the
Add CR
bar code
. To add a tab after the bar code, scan the
Add Tab
bar code. Otherwise, scan the
Remove Su
bar code to
remove the su xes.
Manual Trigger - Normal
(Default)
Presentation Mode
Add CR Su x
Remove Su x
Add Tab Su x
Add Code ID Pre to all Symbologies
Scan the following bar code if you wish to add a Code ID pre x to all
symbologies at once.
Note: For a complete list of Code IDs, see the User’s Guide for your
product at our website,
www.youjieaidc.com.
Function Code Transmit
When this selection is enabled and function codes are contained
within the scanned data, the scanner transmits the function code to
the terminal. Charts of these function codes are provided in your
User’s Guide. When the scanner is in keyboard wedge mode, the
scan code is converted to a key code before it is transmitted.
Add Code ID Pre x To All Symbologies
(Temporary)
Enable
(Default)
Disable
Programming the Interface
Scan one of the following bar codes to program your interface.
USB IBM SurePos
(USB Handheld Scanner)
Interface
Keyboard Wedge
IBM PC AT and Compatibles with
CR su x
USB Keyboard (PC)
USB IBM SurePos
(USB Tabletop Scanner)
Interface
USB Keyboard (Mac)
USB Japanese Keyboard (PC)
USB HID Bar Code Scanner
YJ4600
Corded Area-Imaging Scanner
Quick Start Guide
YJ4600-QS Rev A
6/12
Note: Refer to your user’s guide for information about cleaning your
device.
For localized language versions of this document, go to
www.youjieaidc.com
.
Getting Started
Turn computer’s power before connecting the scanner, then
power up the computer once the scanner is fully connected.
Power Supply Assembly (if included)
Connecting the Scanner
USB:
Keyboard Wedge:
Reading Techniques
The view nder projects an aiming
beam that should be centered over the
bar code, but it can be positioned in any
direction for a good read.
Hold the scanner over the bar code,
press the button, and center the aiming
beam on the bar code.
The aiming beam is smaller when the
scanner is closer to the code and larger
when it is farther from the code. Hold
the scanner close to smaller bar codes,
and farther away from large bar codes
to get a proper read.
If the bar code is highly re ective (e.g., laminated), you may need to
tilt the scanner at an angle so the bar code can be scanned.
Standard Product Defaults
The following bar code resets all standard product default settings.
Keyboard Country
Scan the
Program Keyboard Country
bar code below, then scan
the numeric bar code(s) from
page 2
, then the
Save
bar code to
program the keyboard for your country. As a general rule, the
following characters are not supported by the scanner for countries
other than the United States:
@ | $ # { } [ ] = / ‘ \ < > ~
Note: For a complete list of country codes, see the User’s Guide for
your product at our website,
www.youjieaidc.com.
Country Code
Scan
Country Code
Scan
Brazil
16
Turkey F
27
Brazil (MS)
59
Turkey Q
24
Russian
26
Poland
20
Russian (MS)
67
Latin America
14
Russian
(Typewriter)
68
USA (Default)
0
Standard Product Defaults
Program Keyboard Country
Save
Trigger
The following bar codes will allow you to use the scanner in Manual
Trigger - Normal Mode (need to press the button to read) or
Presentation mode (the scanner is activated when it “sees” a bar
code).
Su x
If you want a carriage return after the bar code, scan the
Add CR
bar code
. To add a tab after the bar code, scan the
Add Tab
bar code. Otherwise, scan the
Remove Su
bar code to
remove the su xes.
Manual Trigger - Normal
(Default)
Presentation Mode
Add CR Su x
Remove Su x
Add Tab Su x
Add Code ID Pre to all Symbologies
Scan the following bar code if you wish to add a Code ID pre x to all
symbologies at once.
Note: For a complete list of Code IDs, see the User’s Guide for your
product at our website,
www.youjieaidc.com.
Function Code Transmit
When this selection is enabled and function codes are contained
within the scanned data, the scanner transmits the function code to
the terminal. Charts of these function codes are provided in your
User’s Guide. When the scanner is in keyboard wedge mode, the
scan code is converted to a key code before it is transmitted.
Add Code ID Pre x To All Symbologies
(Temporary)
Enable
(Default)
Disable
Programming the Interface
Scan one of the following bar codes to program your interface.
USB IBM SurePos
(USB Handheld Scanner)
Interface
Keyboard Wedge
IBM PC AT and Compatibles with
CR su x
USB Keyboard (PC)
USB IBM SurePos
(USB Tabletop Scanner)
Interface
USB Keyboard (Mac)
USB Japanese Keyboard (PC)
USB HID Bar Code Scanner
YJ4600
Corded Area-Imaging Scanner
Quick Start Guide
YJ4600-QS Rev A
6/12
Note: Refer to your user’s guide for information about cleaning your
device.
For localized language versions of this document, go to
www.youjieaidc.com
.
Getting Started
Turn computer’s power before connecting the scanner, then
power up the computer once the scanner is fully connected.
Power Supply Assembly (if included)
Connecting the Scanner
USB:
Keyboard Wedge:
Reading Techniques
The view nder projects an aiming
beam that should be centered over the
bar code, but it can be positioned in any
direction for a good read.
Hold the scanner over the bar code,
press the button, and center the aiming
beam on the bar code.
The aiming beam is smaller when the
scanner is closer to the code and larger
when it is farther from the code. Hold
the scanner close to smaller bar codes,
and farther away from large bar codes
to get a proper read.
If the bar code is highly re ective (e.g., laminated), you may need to
tilt the scanner at an angle so the bar code can be scanned.
Standard Product Defaults
The following bar code resets all standard product default settings.
Keyboard Country
Scan the
Program Keyboard Country
bar code below, then scan
the numeric bar code(s) from
page 2
, then the
Save
bar code to
program the keyboard for your country. As a general rule, the
following characters are not supported by the scanner for countries
other than the United States:
@ | $ # { } [ ] = / ‘ \ < > ~
Note: For a complete list of country codes, see the User’s Guide for
your product at our website,
www.youjieaidc.com.
Country Code
Scan
Country Code
Scan
Brazil
16
Turkey F
27
Brazil (MS)
59
Turkey Q
24
Russian
26
Poland
20
Russian (MS)
67
Latin America
14
Russian
(Typewriter)
68
USA (Default)
0
Standard Product Defaults
Program Keyboard Country
Save
Trigger
The following bar codes will allow you to use the scanner in Manual
Trigger - Normal Mode (need to press the button to read) or
Presentation mode (the scanner is activated when it “sees” a bar
code).
Su x
If you want a carriage return after the bar code, scan the
Add CR
bar code
. To add a tab after the bar code, scan the
Add Tab
bar code. Otherwise, scan the
Remove Su
bar code to
remove the su xes.
Manual Trigger - Normal
(Default)
Presentation Mode
Add CR Su x
Remove Su x
Add Tab Su x
Add Code ID Pre to all Symbologies
Scan the following bar code if you wish to add a Code ID pre x to all
symbologies at once.
Note: For a complete list of Code IDs, see the User’s Guide for your
product at our website,
www.youjieaidc.com.
Function Code Transmit
When this selection is enabled and function codes are contained
within the scanned data, the scanner transmits the function code to
the terminal. Charts of these function codes are provided in your
User’s Guide. When the scanner is in keyboard wedge mode, the
scan code is converted to a key code before it is transmitted.
Add Code ID Pre x To All Symbologies
(Temporary)
Enable
(Default)
Disable
Programming the Interface
Scan one of the following bar codes to program your interface.
USB IBM SurePos
(USB Handheld Scanner)
Interface
Keyboard Wedge
IBM PC AT and Compatibles with
CR su x
USB Keyboard (PC)
USB IBM SurePos
(USB Tabletop Scanner)
Interface
USB Keyboard (Mac)
USB Japanese Keyboard (PC)
USB HID Bar Code Scanner
YJ4600
Corded Area-Imaging Scanner
Quick Start Guide
YJ4600-QS Rev A
6/12
Note: Refer to your user’s guide for information about cleaning your
device.
For localized language versions of this document, go to
www.youjieaidc.com
.
Getting Started
Turn computer’s power before connecting the scanner, then
power up the computer once the scanner is fully connected.
Power Supply Assembly (if included)
Connecting the Scanner
USB:
Keyboard Wedge:
Reading Techniques
The view nder projects an aiming
beam that should be centered over the
bar code, but it can be positioned in any
direction for a good read.
Hold the scanner over the bar code,
press the button, and center the aiming
beam on the bar code.
The aiming beam is smaller when the
scanner is closer to the code and larger
when it is farther from the code. Hold
the scanner close to smaller bar codes,
and farther away from large bar codes
to get a proper read.
If the bar code is highly re ective (e.g., laminated), you may need to
tilt the scanner at an angle so the bar code can be scanned.
Standard Product Defaults
The following bar code resets all standard product default settings.
Keyboard Country
Scan the
Program Keyboard Country
bar code below, then scan
the numeric bar code(s) from
page 2
, then the
Save
bar code to
program the keyboard for your country. As a general rule, the
following characters are not supported by the scanner for countries
other than the United States:
@ | $ # { } [ ] = / ‘ \ < > ~
Note: For a complete list of country codes, see the User’s Guide for
your product at our website,
www.youjieaidc.com.
Country Code
Scan
Country Code
Scan
Brazil
16
Turkey F
27
Brazil (MS)
59
Turkey Q
24
Russian
26
Poland
20
Russian (MS)
67
Latin America
14
Russian
(Typewriter)
68
USA (Default)
0
Standard Product Defaults
Program Keyboard Country
Save
Trigger
The following bar codes will allow you to use the scanner in Manual
Trigger - Normal Mode (need to press the button to read) or
Presentation mode (the scanner is activated when it “sees” a bar
code).
Su x
If you want a carriage return after the bar code, scan the
Add CR
bar code
. To add a tab after the bar code, scan the
Add Tab
bar code. Otherwise, scan the
Remove Su
bar code to
remove the su xes.
Manual Trigger - Normal
(Default)
Presentation Mode
Add CR Su x
Remove Su x
Add Tab Su x
Add Code ID Pre to all Symbologies
Scan the following bar code if you wish to add a Code ID pre x to all
symbologies at once.
Note: For a complete list of Code IDs, see the User’s Guide for your
product at our website,
www.youjieaidc.com.
Function Code Transmit
When this selection is enabled and function codes are contained
within the scanned data, the scanner transmits the function code to
the terminal. Charts of these function codes are provided in your
User’s Guide. When the scanner is in keyboard wedge mode, the
scan code is converted to a key code before it is transmitted.
Add Code ID Pre x To All Symbologies
(Temporary)
Enable
(Default)
Disable
Programming the Interface
Scan one of the following bar codes to program your interface.
USB IBM SurePos
(USB Handheld Scanner)
Interface
Keyboard Wedge
IBM PC AT and Compatibles with
CR su x
USB Keyboard (PC)
USB IBM SurePos
(USB Tabletop Scanner)
Interface
USB Keyboard (Mac)
USB Japanese Keyboard (PC)
USB HID Bar Code Scanner
YJ4600
Corded Area-Imaging Scanner
Quick Start Guide
YJ4600-QS Rev A
6/12
Note: Refer to your user’s guide for information about cleaning your
device.
For localized language versions of this document, go to
www.youjieaidc.com
.
Getting Started
Turn computer’s power before connecting the scanner, then
power up the computer once the scanner is fully connected.
Power Supply Assembly (if included)
Connecting the Scanner
USB:
Keyboard Wedge:
Reading Techniques
The view nder projects an aiming
beam that should be centered over the
bar code, but it can be positioned in any
direction for a good read.
Hold the scanner over the bar code,
press the button, and center the aiming
beam on the bar code.
The aiming beam is smaller when the
scanner is closer to the code and larger
when it is farther from the code. Hold
the scanner close to smaller bar codes,
and farther away from large bar codes
to get a proper read.
If the bar code is highly re ective (e.g., laminated), you may need to
tilt the scanner at an angle so the bar code can be scanned.
Standard Product Defaults
The following bar code resets all standard product default settings.
Keyboard Country
Scan the
Program Keyboard Country
bar code below, then scan
the numeric bar code(s) from
page 2
, then the
Save
bar code to
program the keyboard for your country. As a general rule, the
following characters are not supported by the scanner for countries
other than the United States:
@ | $ # { } [ ] = / ‘ \ < > ~
Note: For a complete list of country codes, see the User’s Guide for
your product at our website,
www.youjieaidc.com.
Country Code
Scan
Country Code
Scan
Brazil
16
Turkey F
27
Brazil (MS)
59
Turkey Q
24
Russian
26
Poland
20
Russian (MS)
67
Latin America
14
Russian
(Typewriter)
68
USA (Default)
0
Standard Product Defaults
Program Keyboard Country
Save
Trigger
The following bar codes will allow you to use the scanner in Manual
Trigger - Normal Mode (need to press the button to read) or
Presentation mode (the scanner is activated when it “sees” a bar
code).
Su x
If you want a carriage return after the bar code, scan the
Add CR
bar code
. To add a tab after the bar code, scan the
Add Tab
bar code. Otherwise, scan the
Remove Su
bar code to
remove the su xes.
Manual Trigger - Normal
(Default)
Presentation Mode
Add CR Su x
Remove Su x
Add Tab Su x
Add Code ID Pre to all Symbologies
Scan the following bar code if you wish to add a Code ID pre x to all
symbologies at once.
Note: For a complete list of Code IDs, see the User’s Guide for your
product at our website,
www.youjieaidc.com.
Function Code Transmit
When this selection is enabled and function codes are contained
within the scanned data, the scanner transmits the function code to
the terminal. Charts of these function codes are provided in your
User’s Guide. When the scanner is in keyboard wedge mode, the
scan code is converted to a key code before it is transmitted.
Add Code ID Pre x To All Symbologies
(Temporary)
Enable
(Default)
Disable
Programming the Interface
Scan one of the following bar codes to program your interface.
USB IBM SurePos
(USB Handheld Scanner)
Interface
Keyboard Wedge
IBM PC AT and Compatibles with
CR su x
USB Keyboard (PC)
USB IBM SurePos
(USB Tabletop Scanner)
Interface
USB Keyboard (Mac)
USB Japanese Keyboard (PC)
USB HID Bar Code Scanner
YJ4600
Corded Area-Imaging Scanner
Quick Start Guide
YJ4600-QS Rev A
6/12
Note: Refer to your user’s guide for information about cleaning your
device.
For localized language versions of this document, go to
www.youjieaidc.com
.
Getting Started
Turn computer’s power before connecting the scanner, then
power up the computer once the scanner is fully connected.
Power Supply Assembly (if included)
Connecting the Scanner
USB:
Keyboard Wedge:
Reading Techniques
The view nder projects an aiming
beam that should be centered over the
bar code, but it can be positioned in any
direction for a good read.
Hold the scanner over the bar code,
press the button, and center the aiming
beam on the bar code.
The aiming beam is smaller when the
scanner is closer to the code and larger
when it is farther from the code. Hold
the scanner close to smaller bar codes,
and farther away from large bar codes
to get a proper read.
If the bar code is highly re ective (e.g., laminated), you may need to
tilt the scanner at an angle so the bar code can be scanned.
Standard Product Defaults
The following bar code resets all standard product default settings.
Keyboard Country
Scan the
Program Keyboard Country
bar code below, then scan
the numeric bar code(s) from
page 2
, then the
Save
bar code to
program the keyboard for your country. As a general rule, the
following characters are not supported by the scanner for countries
other than the United States:
@ | $ # { } [ ] = / ‘ \ < > ~
Note: For a complete list of country codes, see the User’s Guide for
your product at our website,
www.youjieaidc.com.
Country Code
Scan
Country Code
Scan
Brazil
16
Turkey F
27
Brazil (MS)
59
Turkey Q
24
Russian
26
Poland
20
Russian (MS)
67
Latin America
14
Russian
(Typewriter)
68
USA (Default)
0
Standard Product Defaults
Program Keyboard Country
Save
Trigger
The following bar codes will allow you to use the scanner in Manual
Trigger - Normal Mode (need to press the button to read) or
Presentation mode (the scanner is activated when it “sees” a bar
code).
Su x
If you want a carriage return after the bar code, scan the
Add CR
bar code
. To add a tab after the bar code, scan the
Add Tab
bar code. Otherwise, scan the
Remove Su
bar code to
remove the su xes.
Manual Trigger - Normal
(Default)
Presentation Mode
Add CR Su x
Remove Su x
Add Tab Su x
Add Code ID Pre to all Symbologies
Scan the following bar code if you wish to add a Code ID pre x to all
symbologies at once.
Note: For a complete list of Code IDs, see the User’s Guide for your
product at our website,
www.youjieaidc.com.
Function Code Transmit
When this selection is enabled and function codes are contained
within the scanned data, the scanner transmits the function code to
the terminal. Charts of these function codes are provided in your
User’s Guide. When the scanner is in keyboard wedge mode, the
scan code is converted to a key code before it is transmitted.
Add Code ID Pre x To All Symbologies
(Temporary)
Enable
(Default)
Disable
Programming the Interface
Scan one of the following bar codes to program your interface.
USB IBM SurePos
(USB Handheld Scanner)
Interface
Keyboard Wedge
IBM PC AT and Compatibles with
CR su x
USB Keyboard (PC)
USB IBM SurePos
(USB Tabletop Scanner)
Interface
USB Keyboard (Mac)
USB Japanese Keyboard (PC)
USB HID Bar Code Scanner
YJ4600
Corded Area-Imaging Scanner
Quick Start Guide
YJ4600-QS Rev A
6/12
Note: Refer to your user’s guide for information about cleaning your
device.
For localized language versions of this document, go to
www.youjieaidc.com
.
Getting Started
Turn computer’s power before connecting the scanner, then
power up the computer once the scanner is fully connected.
Power Supply Assembly (if included)
Connecting the Scanner
USB:
Keyboard Wedge:
Reading Techniques
The view nder projects an aiming
beam that should be centered over the
bar code, but it can be positioned in any
direction for a good read.
Hold the scanner over the bar code,
press the button, and center the aiming
beam on the bar code.
The aiming beam is smaller when the
scanner is closer to the code and larger
when it is farther from the code. Hold
the scanner close to smaller bar codes,
and farther away from large bar codes
to get a proper read.
If the bar code is highly re ective (e.g., laminated), you may need to
tilt the scanner at an angle so the bar code can be scanned.
Standard Product Defaults
The following bar code resets all standard product default settings.
Keyboard Country
Scan the
Program Keyboard Country
bar code below, then scan
the numeric bar code(s) from
page 2
, then the
Save
bar code to
program the keyboard for your country. As a general rule, the
following characters are not supported by the scanner for countries
other than the United States:
@ | $ # { } [ ] = / ‘ \ < > ~
Note: For a complete list of country codes, see the User’s Guide for
your product at our website,
www.youjieaidc.com.
Country Code
Scan
Country Code
Scan
Brazil
16
Turkey F
27
Brazil (MS)
59
Turkey Q
24
Russian
26
Poland
20
Russian (MS)
67
Latin America
14
Russian
(Typewriter)
68
USA (Default)
0
Standard Product Defaults
Program Keyboard Country
Save
Trigger
The following bar codes will allow you to use the scanner in Manual
Trigger - Normal Mode (need to press the button to read) or
Presentation mode (the scanner is activated when it “sees” a bar
code).
Su x
If you want a carriage return after the bar code, scan the
Add CR
bar code
. To add a tab after the bar code, scan the
Add Tab
bar code. Otherwise, scan the
Remove Su
bar code to
remove the su xes.
Manual Trigger - Normal
(Default)
Presentation Mode
Add CR Su x
Remove Su x
Add Tab Su x
Add Code ID Pre to all Symbologies
Scan the following bar code if you wish to add a Code ID pre x to all
symbologies at once.
Note: For a complete list of Code IDs, see the User’s Guide for your
product at our website,
www.youjieaidc.com.
Function Code Transmit
When this selection is enabled and function codes are contained
within the scanned data, the scanner transmits the function code to
the terminal. Charts of these function codes are provided in your
User’s Guide. When the scanner is in keyboard wedge mode, the
scan code is converted to a key code before it is transmitted.
Add Code ID Pre x To All Symbologies
(Temporary)
Enable
(Default)
Disable
Programming the Interface
Scan one of the following bar codes to program your interface.
USB IBM SurePos
(USB Handheld Scanner)
Interface
Keyboard Wedge
IBM PC AT and Compatibles with
CR su x
USB Keyboard (PC)
USB IBM SurePos
(USB Tabletop Scanner)
Interface
USB Keyboard (Mac)
USB Japanese Keyboard (PC)
USB HID Bar Code Scanner
YJ4600
Corded Area-Imaging Scanner
Quick Start Guide
YJ4600-QS Rev A
6/12
Note: Refer to your user’s guide for information about cleaning your
device.
For localized language versions of this document, go to
www.youjieaidc.com
.
Getting Started
Turn computer’s power before connecting the scanner, then
power up the computer once the scanner is fully connected.
Power Supply Assembly (if included)
Connecting the Scanner
USB:
Keyboard Wedge:
Reading Techniques
The view nder projects an aiming
beam that should be centered over the
bar code, but it can be positioned in any
direction for a good read.
Hold the scanner over the bar code,
press the button, and center the aiming
beam on the bar code.
The aiming beam is smaller when the
scanner is closer to the code and larger
when it is farther from the code. Hold
the scanner close to smaller bar codes,
and farther away from large bar codes
to get a proper read.
If the bar code is highly re ective (e.g., laminated), you may need to
tilt the scanner at an angle so the bar code can be scanned.
Standard Product Defaults
The following bar code resets all standard product default settings.
Keyboard Country
Scan the
Program Keyboard Country
bar code below, then scan
the numeric bar code(s) from
page 2
, then the
Save
bar code to
program the keyboard for your country. As a general rule, the
following characters are not supported by the scanner for countries
other than the United States:
@ | $ # { } [ ] = / ‘ \ < > ~
Note: For a complete list of country codes, see the User’s Guide for
your product at our website,
www.youjieaidc.com.
Country Code
Scan
Country Code
Scan
Brazil
16
Turkey F
27
Brazil (MS)
59
Turkey Q
24
Russian
26
Poland
20
Russian (MS)
67
Latin America
14
Russian
(Typewriter)
68
USA (Default)
0
Standard Product Defaults
Program Keyboard Country
Save
Trigger
The following bar codes will allow you to use the scanner in Manual
Trigger - Normal Mode (need to press the button to read) or
Presentation mode (the scanner is activated when it “sees” a bar
code).
Su x
If you want a carriage return after the bar code, scan the
Add CR
bar code
. To add a tab after the bar code, scan the
Add Tab
bar code. Otherwise, scan the
Remove Su
bar code to
remove the su xes.
Manual Trigger - Normal
(Default)
Presentation Mode
Add CR Su x
Remove Su x
Add Tab Su x
Add Code ID Pre to all Symbologies
Scan the following bar code if you wish to add a Code ID pre x to all
symbologies at once.
Note: For a complete list of Code IDs, see the User’s Guide for your
product at our website,
www.youjieaidc.com.
Function Code Transmit
When this selection is enabled and function codes are contained
within the scanned data, the scanner transmits the function code to
the terminal. Charts of these function codes are provided in your
User’s Guide. When the scanner is in keyboard wedge mode, the
scan code is converted to a key code before it is transmitted.
Add Code ID Pre x To All Symbologies
(Temporary)
Enable
(Default)
Disable
Programming the Interface
Scan one of the following bar codes to program your interface.
USB IBM SurePos
(USB Handheld Scanner)
Interface
Keyboard Wedge
IBM PC AT and Compatibles with
CR su x
USB Keyboard (PC)
USB IBM SurePos
(USB Tabletop Scanner)
Interface
USB Keyboard (Mac)
USB Japanese Keyboard (PC)
USB HID Bar Code Scanner
YJ4600
Corded Area-Imaging Scanner
Quick Start Guide
YJ4600-QS Rev A
6/12
Note: Refer to your user’s guide for information about cleaning your
device.
For localized language versions of this document, go to
www.youjieaidc.com
.
Getting Started
Turn computer’s power before connecting the scanner, then
power up the computer once the scanner is fully connected.
Power Supply Assembly (if included)
Connecting the Scanner
USB:
Keyboard Wedge:
Reading Techniques
The view nder projects an aiming
beam that should be centered over the
bar code, but it can be positioned in any
direction for a good read.
Hold the scanner over the bar code,
press the button, and center the aiming
beam on the bar code.
The aiming beam is smaller when the
scanner is closer to the code and larger
when it is farther from the code. Hold
the scanner close to smaller bar codes,
and farther away from large bar codes
to get a proper read.
If the bar code is highly re ective (e.g., laminated), you may need to
tilt the scanner at an angle so the bar code can be scanned.
Standard Product Defaults
The following bar code resets all standard product default settings.
Keyboard Country
Scan the
Program Keyboard Country
bar code below, then scan
the numeric bar code(s) from
page 2
, then the
Save
bar code to
program the keyboard for your country. As a general rule, the
following characters are not supported by the scanner for countries
other than the United States:
@ | $ # { } [ ] = / ‘ \ < > ~
Note: For a complete list of country codes, see the User’s Guide for
your product at our website,
www.youjieaidc.com.
Country Code
Scan
Country Code
Scan
Brazil
16
Turkey F
27
Brazil (MS)
59
Turkey Q
24
Russian
26
Poland
20
Russian (MS)
67
Latin America
14
Russian
(Typewriter)
68
USA (Default)
0
Standard Product Defaults
Program Keyboard Country
Save
Trigger
The following bar codes will allow you to use the scanner in Manual
Trigger - Normal Mode (need to press the button to read) or
Presentation mode (the scanner is activated when it “sees” a bar
code).
Su x
If you want a carriage return after the bar code, scan the
Add CR
bar code
. To add a tab after the bar code, scan the
Add Tab
bar code. Otherwise, scan the
Remove Su
bar code to
remove the su xes.
Manual Trigger - Normal
(Default)
Presentation Mode
Add CR Su x
Remove Su x
Add Tab Su x
Add Code ID Pre to all Symbologies
Scan the following bar code if you wish to add a Code ID pre x to all
symbologies at once.
Note: For a complete list of Code IDs, see the User’s Guide for your
product at our website,
www.youjieaidc.com.
Function Code Transmit
When this selection is enabled and function codes are contained
within the scanned data, the scanner transmits the function code to
the terminal. Charts of these function codes are provided in your
User’s Guide. When the scanner is in keyboard wedge mode, the
scan code is converted to a key code before it is transmitted.
Add Code ID Pre x To All Symbologies
(Temporary)
Enable
(Default)
Disable
Programming the Interface
Scan one of the following bar codes to program your interface.
USB IBM SurePos
(USB Handheld Scanner)
Interface
Keyboard Wedge
IBM PC AT and Compatibles with
CR su x
USB Keyboard (PC)
USB IBM SurePos
(USB Tabletop Scanner)
Interface
USB Keyboard (Mac)
USB Japanese Keyboard (PC)
USB HID Bar Code Scanner
YJ4600
Corded Area-Imaging Scanner
Quick Start Guide
YJ4600-QS Rev A
6/12
Note: Refer to your user’s guide for information about cleaning your
device.
For localized language versions of this document, go to
www.youjieaidc.com
.
Getting Started
Turn computer’s power before connecting the scanner, then
power up the computer once the scanner is fully connected.
Power Supply Assembly (if included)
Connecting the Scanner
USB:
Keyboard Wedge:
Reading Techniques
The view nder projects an aiming
beam that should be centered over the
bar code, but it can be positioned in any
direction for a good read.
Hold the scanner over the bar code,
press the button, and center the aiming
beam on the bar code.
The aiming beam is smaller when the
scanner is closer to the code and larger
when it is farther from the code. Hold
the scanner close to smaller bar codes,
and farther away from large bar codes
to get a proper read.
If the bar code is highly re ective (e.g., laminated), you may need to
tilt the scanner at an angle so the bar code can be scanned.
Standard Product Defaults
The following bar code resets all standard product default settings.
Keyboard Country
Scan the
Program Keyboard Country
bar code below, then scan
the numeric bar code(s) from
page 2
, then the
Save
bar code to
program the keyboard for your country. As a general rule, the
following characters are not supported by the scanner for countries
other than the United States:
@ | $ # { } [ ] = / ‘ \ < > ~
Note: For a complete list of country codes, see the User’s Guide for
your product at our website,
www.youjieaidc.com.
Country Code
Scan
Country Code
Scan
Brazil
16
Turkey F
27
Brazil (MS)
59
Turkey Q
24
Russian
26
Poland
20
Russian (MS)
67
Latin America
14
Russian
(Typewriter)
68
USA (Default)
0
Standard Product Defaults
Program Keyboard Country
Save
Trigger
The following bar codes will allow you to use the scanner in Manual
Trigger - Normal Mode (need to press the button to read) or
Presentation mode (the scanner is activated when it “sees” a bar
code).
Su x
If you want a carriage return after the bar code, scan the
Add CR
bar code
. To add a tab after the bar code, scan the
Add Tab
bar code. Otherwise, scan the
Remove Su
bar code to
remove the su xes.
Manual Trigger - Normal
(Default)
Presentation Mode
Add CR Su x
Remove Su x
Add Tab Su x
Add Code ID Pre to all Symbologies
Scan the following bar code if you wish to add a Code ID pre x to all
symbologies at once.
Note: For a complete list of Code IDs, see the User’s Guide for your
product at our website,
www.youjieaidc.com.
Function Code Transmit
When this selection is enabled and function codes are contained
within the scanned data, the scanner transmits the function code to
the terminal. Charts of these function codes are provided in your
User’s Guide. When the scanner is in keyboard wedge mode, the
scan code is converted to a key code before it is transmitted.
Add Code ID Pre x To All Symbologies
(Temporary)
Enable
(Default)
Disable
Programming the Interface
Scan one of the following bar codes to program your interface.
USB IBM SurePos
(USB Handheld Scanner)
Interface
Keyboard Wedge
IBM PC AT and Compatibles with
CR su x
USB Keyboard (PC)
USB IBM SurePos
(USB Tabletop Scanner)
Interface
USB Keyboard (Mac)
USB Japanese Keyboard (PC)
USB HID Bar Code Scanner
YJ4600
Corded Area-Imaging Scanner
Quick Start Guide
YJ4600-QS Rev A
6/12
Note: Refer to your user’s guide for information about cleaning your
device.
For localized language versions of this document, go to
www.youjieaidc.com
.
Getting Started
Turn computer’s power before connecting the scanner, then
power up the computer once the scanner is fully connected.
Power Supply Assembly (if included)
Connecting the Scanner
USB:
Keyboard Wedge:
Reading Techniques
The view nder projects an aiming
beam that should be centered over the
bar code, but it can be positioned in any
direction for a good read.
Hold the scanner over the bar code,
press the button, and center the aiming
beam on the bar code.
The aiming beam is smaller when the
scanner is closer to the code and larger
when it is farther from the code. Hold
the scanner close to smaller bar codes,
and farther away from large bar codes
to get a proper read.
If the bar code is highly re ective (e.g., laminated), you may need to
tilt the scanner at an angle so the bar code can be scanned.
Standard Product Defaults
The following bar code resets all standard product default settings.
Keyboard Country
Scan the
Program Keyboard Country
bar code below, then scan
the numeric bar code(s) from
page 2
, then the
Save
bar code to
program the keyboard for your country. As a general rule, the
following characters are not supported by the scanner for countries
other than the United States:
@ | $ # { } [ ] = / ‘ \ < > ~
Note: For a complete list of country codes, see the User’s Guide for
your product at our website,
www.youjieaidc.com.
Country Code
Scan
Country Code
Scan
Brazil
16
Turkey F
27
Brazil (MS)
59
Turkey Q
24
Russian
26
Poland
20
Russian (MS)
67
Latin America
14
Russian
(Typewriter)
68
USA (Default)
0
Standard Product Defaults
Program Keyboard Country
Save
Trigger
The following bar codes will allow you to use the scanner in Manual
Trigger - Normal Mode (need to press the button to read) or
Presentation mode (the scanner is activated when it “sees” a bar
code).
Su x
If you want a carriage return after the bar code, scan the
Add CR
bar code
. To add a tab after the bar code, scan the
Add Tab
bar code. Otherwise, scan the
Remove Su
bar code to
remove the su xes.
Manual Trigger - Normal
(Default)
Presentation Mode
Add CR Su x
Remove Su x
Add Tab Su x
Add Code ID Pre to all Symbologies
Scan the following bar code if you wish to add a Code ID pre x to all
symbologies at once.
Note: For a complete list of Code IDs, see the User’s Guide for your
product at our website,
www.youjieaidc.com.
Function Code Transmit
When this selection is enabled and function codes are contained
within the scanned data, the scanner transmits the function code to
the terminal. Charts of these function codes are provided in your
User’s Guide. When the scanner is in keyboard wedge mode, the
scan code is converted to a key code before it is transmitted.
Add Code ID Pre x To All Symbologies
(Temporary)
Enable
(Default)
Disable
Programming the Interface
Scan one of the following bar codes to program your interface.
USB IBM SurePos
(USB Handheld Scanner)
Interface
Keyboard Wedge
IBM PC AT and Compatibles with
CR su x
USB Keyboard (PC)
USB IBM SurePos
(USB Tabletop Scanner)
Interface
USB Keyboard (Mac)
USB Japanese Keyboard (PC)
USB HID Bar Code Scanner
YJ4600
Corded Area-Imaging Scanner
Quick Start Guide
YJ4600-QS Rev A
6/12
Note: Refer to your user’s guide for information about cleaning your
device.
For localized language versions of this document, go to
www.youjieaidc.com
.
Getting Started
Turn computer’s power before connecting the scanner, then
power up the computer once the scanner is fully connected.
Power Supply Assembly (if included)
Connecting the Scanner
USB:
Keyboard Wedge:
Reading Techniques
The view nder projects an aiming
beam that should be centered over the
bar code, but it can be positioned in any
direction for a good read.
Hold the scanner over the bar code,
press the button, and center the aiming
beam on the bar code.
The aiming beam is smaller when the
scanner is closer to the code and larger
when it is farther from the code. Hold
the scanner close to smaller bar codes,
and farther away from large bar codes
to get a proper read.
If the bar code is highly re ective (e.g., laminated), you may need to
tilt the scanner at an angle so the bar code can be scanned.
Standard Product Defaults
The following bar code resets all standard product default settings.
Keyboard Country
Scan the
Program Keyboard Country
bar code below, then scan
the numeric bar code(s) from
page 2
, then the
Save
bar code to
program the keyboard for your country. As a general rule, the
following characters are not supported by the scanner for countries
other than the United States:
@ | $ # { } [ ] = / ‘ \ < > ~
Note: For a complete list of country codes, see the User’s Guide for
your product at our website,
www.youjieaidc.com.
Country Code
Scan
Country Code
Scan
Brazil
16
Turkey F
27
Brazil (MS)
59
Turkey Q
24
Russian
26
Poland
20
Russian (MS)
67
Latin America
14
Russian
(Typewriter)
68
USA (Default)
0
Standard Product Defaults
Program Keyboard Country
Save
Trigger
The following bar codes will allow you to use the scanner in Manual
Trigger - Normal Mode (need to press the button to read) or
Presentation mode (the scanner is activated when it “sees” a bar
code).
Su x
If you want a carriage return after the bar code, scan the
Add CR
bar code
. To add a tab after the bar code, scan the
Add Tab
bar code. Otherwise, scan the
Remove Su
bar code to
remove the su xes.
Manual Trigger - Normal
(Default)
Presentation Mode
Add CR Su x
Remove Su x
Add Tab Su x
Add Code ID Pre to all Symbologies
Scan the following bar code if you wish to add a Code ID pre x to all
symbologies at once.
Note: For a complete list of Code IDs, see the User’s Guide for your
product at our website,
www.youjieaidc.com.
Function Code Transmit
When this selection is enabled and function codes are contained
within the scanned data, the scanner transmits the function code to
the terminal. Charts of these function codes are provided in your
User’s Guide. When the scanner is in keyboard wedge mode, the
scan code is converted to a key code before it is transmitted.
Add Code ID Pre x To All Symbologies
(Temporary)
Enable
(Default)
Disable
Programming the Interface
Scan one of the following bar codes to program your interface.
USB IBM SurePos
(USB Handheld Scanner)
Interface
Keyboard Wedge
IBM PC AT and Compatibles with
CR su x
USB Keyboard (PC)
USB IBM SurePos
(USB Tabletop Scanner)
Interface
USB Keyboard (Mac)
USB Japanese Keyboard (PC)
USB HID Bar Code Scanner
Mobile Phone Read Mode
When this mode is selected, your scanner is optimized to read bar
codes from mobile phone or other LED displays. However, the speed
of scanning printed bar codes may be slightly lower when this mode
is enabled.
Note: To turn Mobile Phone Read Mode, scan the Manual
Trigger - Normal bar code on the previous page.
Hand Held Scanning - Mobile
Phone
Presentation Scanning - Mobile
Phone
Data Format Editor Instructions
The following are abbreviated instructions for entering a data format.
For complete instructions refer to your User’s Guide, available at our
website,
www.youjieaidc.com.
1. Scan the
Enter Data Format
symbol.
2. Primary/Alternate Format: scan
0
for Primary Format
3. Terminal Type: scan
099
for any terminal type
4. Code I.D.: scan
99
for any bar code type
5. Length: scan
9999
for any length bar code.
6. Editor commands: use the Programming Chart that follows.
7. Scan
Save
to save your entries.
Enter Data Format
Clear All Data Formats
Save
Programming Chart
0
2
1
4
3
5
6
7
A
B
C
D
E
F
9
8
Save
Technical Assistance
Contact information for technical support, product service, and repair
can be found at
www.youjieaidc.com
.
User Documentation
For localized versions of this document, and to download the User’s
Guide, go to
www.youjieaidc.com
.
Disclaimer
Youjie reserves the right to make changes in speci
tions and other
information contained in this docum ent without prior notice, and the reader
should in all cases consult Youjie to determine whether any such changes
have been made. The information in this publication does not represent a
commitment on the part of Youjie.
Youjie shall not be liable for technical or editorial errors or omissions
contained herein; nor for incidental or consequential damages resulting from
the furnishing, performance, or use of this material.
This document contains proprietary informa tion that is protected by copyright.
All rights are reserved. No part of this document may be photocopied,
reproduced, or translated into anot her language without the prior written
consent of Youjie.
Copyright 2012
.
All rights reserved.
Web Address:
www.youjieaidc.com
Limited Warranty
Youjie warrants its products to be free from defects in materials and
workmanship and to conform to Youjie’s published speci cations
applicable to the products purchased at the time of shipment. This
warranty does not cover any Youjie product which is (i) improperly
installed or used; (ii) damaged by accident or negligence, including
failure to follow the proper maintenance, service, and cleaning
schedule; or (iii) damaged as a result of (A) modi cation or alteration
by the purchaser or other party, (B) excessive voltage or current
supplied to or drawn from the interface connections, (C) static elec-
tricity or electro-static discharge, (D) operation under conditions
beyond the speci ed operating parameters, or (E) repair or service
of the product by anyone other than Youjie or its authorized repre-
sentatives.
This warranty shall extend from the time of shipment for the duration
published by Youjie for the product at the time of purchase ("War-
ranty Period"). Any defective product must be returned (at pur-
chaser’s expense) during the Warranty Period to Youjie factory or
authorized service center for inspection. No product will be
accepted by Youjie without a Return Materials Authorization, which
may be obtained by contacting Youjie. In the event that the product
is returned to Youjie or its authorized service center within the War-
ranty Period and Youjie determines to its satisfaction that the prod-
uct is defective due to defects in materials or workmanship,Youjie, at
its sole option, will either repair or replace the product without
charge, except for return shipping to Youjie.
EXCEPT AS MAY BE OTHERWISE PROVIDED BY APPLICABLE
LAW, THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER
COVENANTS OR WARRANTIES, EITHER EXPRESSED OR
IMPLIED, ORAL OR WRITTEN, INCLUDING, WITHOUT LIMITA-
TION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGE-
MENT.
YOUJIE’S RESPONSIBILITY AND PURCHASER’S EXCLUSIVE
REMEDY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR
OR REPLACEMENT OF THE DEFECTIVE PRODUCT WITH NEW
OR REFURBISHED PARTS. IN NO EVENT SHALL YOUJIE BE
LIABLE FOR INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES, AND, IN NO EVENT, SHALL ANY LIABILITY OF YOU-
JIE ARISING IN CONNECTION WITH ANY PRODUCT SOLD
HEREUNDER (WHETHER SUCH LIABILITY ARISES FROM A
CLAIM BASED ON CONTRACT, WARRANTY, TORT, OR OTHER-
WISE) EXCEED THE ACTUAL AMOUNT PAID TO YOUJIE FOR
THE PRODUCT. THESE LIMITATIONS ON LIABILITY SHALL
REMAIN IN FULL FORCE AND EFFECT EVEN WHEN YOUJIE
MAY HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH
INJURIES, LOSSES, OR DAMAGES. SOME STATES, PROV-
INCES, OR COUNTRIES DO NOT ALLOW THE EXCLUSION OR
LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,
SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY
TO YOU.
All provisions of this Limited Warranty are separate and severable,
which means that if any provision is held invalid and unenforceable,
such determination shall not a ect the validity of enforceability of the
other provisions hereof. Use of any peripherals not provided by the
manufacturer may result in damage not covered by this warranty.
This includes but is not limited to: cables, power supplies, cradles,
and docking stations. Youjie extends these warranties only to the
st end-users of the products. These warranties are non-transfer-
able.
The duration of the limited warranty for the Youjie 4600 scanner is
ninety (90) days.
Mobile Phone Read Mode
When this mode is selected, your scanner is optimized to read bar
codes from mobile phone or other LED displays. However, the speed
of scanning printed bar codes may be slightly lower when this mode
is enabled.
Note: To turn Mobile Phone Read Mode, scan the Manual
Trigger - Normal bar code on the previous page.
Hand Held Scanning - Mobile
Phone
Presentation Scanning - Mobile
Phone
Data Format Editor Instructions
The following are abbreviated instructions for entering a data format.
For complete instructions refer to your User’s Guide, available at our
website,
www.youjieaidc.com.
1. Scan the
Enter Data Format
symbol.
2. Primary/Alternate Format: scan
0
for Primary Format
3. Terminal Type: scan
099
for any terminal type
4. Code I.D.: scan
99
for any bar code type
5. Length: scan
9999
for any length bar code.
6. Editor commands: use the Programming Chart that follows.
7. Scan
Save
to save your entries.
Enter Data Format
Clear All Data Formats
Save
Programming Chart
0
2
1
4
3
5
6
7
A
B
C
D
E
F
9
8
Save
Technical Assistance
Contact information for technical support, product service, and repair
can be found at
www.youjieaidc.com
.
User Documentation
For localized versions of this document, and to download the User’s
Guide, go to
www.youjieaidc.com
.
Disclaimer
Youjie reserves the right to make changes in speci
tions and other
information contained in this docum ent without prior notice, and the reader
should in all cases consult Youjie to determine whether any such changes
have been made. The information in this publication does not represent a
commitment on the part of Youjie.
Youjie shall not be liable for technical or editorial errors or omissions
contained herein; nor for incidental or consequential damages resulting from
the furnishing, performance, or use of this material.
This document contains proprietary informa tion that is protected by copyright.
All rights are reserved. No part of this document may be photocopied,
reproduced, or translated into anot her language without the prior written
consent of Youjie.
Copyright 2012
.
All rights reserved.
Web Address:
www.youjieaidc.com
Limited Warranty
Youjie warrants its products to be free from defects in materials and
workmanship and to conform to Youjie’s published speci cations
applicable to the products purchased at the time of shipment. This
warranty does not cover any Youjie product which is (i) improperly
installed or used; (ii) damaged by accident or negligence, including
failure to follow the proper maintenance, service, and cleaning
schedule; or (iii) damaged as a result of (A) modi cation or alteration
by the purchaser or other party, (B) excessive voltage or current
supplied to or drawn from the interface connections, (C) static elec-
tricity or electro-static discharge, (D) operation under conditions
beyond the speci ed operating parameters, or (E) repair or service
of the product by anyone other than Youjie or its authorized repre-
sentatives.
This warranty shall extend from the time of shipment for the duration
published by Youjie for the product at the time of purchase ("War-
ranty Period"). Any defective product must be returned (at pur-
chaser’s expense) during the Warranty Period to Youjie factory or
authorized service center for inspection. No product will be
accepted by Youjie without a Return Materials Authorization, which
may be obtained by contacting Youjie. In the event that the product
is returned to Youjie or its authorized service center within the War-
ranty Period and Youjie determines to its satisfaction that the prod-
uct is defective due to defects in materials or workmanship,Youjie, at
its sole option, will either repair or replace the product without
charge, except for return shipping to Youjie.
EXCEPT AS MAY BE OTHERWISE PROVIDED BY APPLICABLE
LAW, THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER
COVENANTS OR WARRANTIES, EITHER EXPRESSED OR
IMPLIED, ORAL OR WRITTEN, INCLUDING, WITHOUT LIMITA-
TION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGE-
MENT.
YOUJIE’S RESPONSIBILITY AND PURCHASER’S EXCLUSIVE
REMEDY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR
OR REPLACEMENT OF THE DEFECTIVE PRODUCT WITH NEW
OR REFURBISHED PARTS. IN NO EVENT SHALL YOUJIE BE
LIABLE FOR INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES, AND, IN NO EVENT, SHALL ANY LIABILITY OF YOU-
JIE ARISING IN CONNECTION WITH ANY PRODUCT SOLD
HEREUNDER (WHETHER SUCH LIABILITY ARISES FROM A
CLAIM BASED ON CONTRACT, WARRANTY, TORT, OR OTHER-
WISE) EXCEED THE ACTUAL AMOUNT PAID TO YOUJIE FOR
THE PRODUCT. THESE LIMITATIONS ON LIABILITY SHALL
REMAIN IN FULL FORCE AND EFFECT EVEN WHEN YOUJIE
MAY HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH
INJURIES, LOSSES, OR DAMAGES. SOME STATES, PROV-
INCES, OR COUNTRIES DO NOT ALLOW THE EXCLUSION OR
LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,
SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY
TO YOU.
All provisions of this Limited Warranty are separate and severable,
which means that if any provision is held invalid and unenforceable,
such determination shall not a ect the validity of enforceability of the
other provisions hereof. Use of any peripherals not provided by the
manufacturer may result in damage not covered by this warranty.
This includes but is not limited to: cables, power supplies, cradles,
and docking stations. Youjie extends these warranties only to the
st end-users of the products. These warranties are non-transfer-
able.
The duration of the limited warranty for the Youjie 4600 scanner is
ninety (90) days.
YJ4600
Corded Area-Imaging Scanner
Quick Start Guide
YJ4600-QS Rev A
6/12
Note: Refer to your user’s guide for information about cleaning your
device.
For localized language versions of this document, go to
www.youjieaidc.com
.
Getting Started
Turn computer’s power before connecting the scanner, then
power up the computer once the scanner is fully connected.
Power Supply Assembly (if included)
Connecting the Scanner
USB:
Keyboard Wedge:
Reading Techniques
The view nder projects an aiming
beam that should be centered over the
bar code, but it can be positioned in any
direction for a good read.
Hold the scanner over the bar code,
press the button, and center the aiming
beam on the bar code.
The aiming beam is smaller when the
scanner is closer to the code and larger
when it is farther from the code. Hold
the scanner close to smaller bar codes,
and farther away from large bar codes
to get a proper read.
If the bar code is highly re ective (e.g., laminated), you may need to
tilt the scanner at an angle so the bar code can be scanned.
Standard Product Defaults
The following bar code resets all standard product default settings.
Keyboard Country
Scan the
Program Keyboard Country
bar code below, then scan
the numeric bar code(s) from
page 2
, then the
Save
bar code to
program the keyboard for your country. As a general rule, the
following characters are not supported by the scanner for countries
other than the United States:
@ | $ # { } [ ] = / ‘ \ < > ~
Note: For a complete list of country codes, see the User’s Guide for
your product at our website,
www.youjieaidc.com.
Country Code
Scan
Country Code
Scan
Brazil
16
Turkey F
27
Brazil (MS)
59
Turkey Q
24
Russian
26
Poland
20
Russian (MS)
67
Latin America
14
Russian
(Typewriter)
68
USA (Default)
0
Standard Product Defaults
Program Keyboard Country
Save
Trigger
The following bar codes will allow you to use the scanner in Manual
Trigger - Normal Mode (need to press the button to read) or
Presentation mode (the scanner is activated when it “sees” a bar
code).
Su x
If you want a carriage return after the bar code, scan the
Add CR
bar code
. To add a tab after the bar code, scan the
Add Tab
bar code. Otherwise, scan the
Remove Su
bar code to
remove the su xes.
Manual Trigger - Normal
(Default)
Presentation Mode
Add CR Su x
Remove Su x
Add Tab Su x
Add Code ID Pre to all Symbologies
Scan the following bar code if you wish to add a Code ID pre x to all
symbologies at once.
Note: For a complete list of Code IDs, see the User’s Guide for your
product at our website,
www.youjieaidc.com.
Function Code Transmit
When this selection is enabled and function codes are contained
within the scanned data, the scanner transmits the function code to
the terminal. Charts of these function codes are provided in your
User’s Guide. When the scanner is in keyboard wedge mode, the
scan code is converted to a key code before it is transmitted.
Add Code ID Pre x To All Symbologies
(Temporary)
Enable
(Default)
Disable
Programming the Interface
Scan one of the following bar codes to program your interface.
USB IBM SurePos
(USB Handheld Scanner)
Interface
Keyboard Wedge
IBM PC AT and Compatibles with
CR su x
USB Keyboard (PC)
USB IBM SurePos
(USB Tabletop Scanner)
Interface
USB Keyboard (Mac)
USB Japanese Keyboard (PC)
USB HID Bar Code Scanner
1
2
3
GETTING STARTED
READING TECHNIQUE
SCANNER SETTINGS
Turn the computer
OFF
.
Connect the scanner
USB plug into a USB
port on the computer.
The scanner projects an aiming beam that should be
centered over the bar code for optimal performance.
Hold the scanner closer to small codes and farther
away from larger codes for best results.
TRIGGER MODE:
Scan the code below to activate
the manual trigger mode. In this mode, the scanner
will only activate when the trigger is pulled.
Scan the appropriate barcode below to add a
Carriage Return or Tab, or remove all suffixes.
Scan the appropriate barcode below for the desired
interface.
Scan the barcode below to reset the scanner to all
factory defaults.
Scan the barcode below to add a Code ID prefix to
all symbologies
Scan the barcodes below to optimize scanning on
mobile phones or other backlit LED devices.
Note:
For a complete list of Code IDs, see the Owner’s
manual at www.pos-x.com/downloads
Note:
To turn off Mobile Phone Read Mode, scan the
desired mode in the “SCAN MODE” section.
PRESENTATION MODE:
Scan the code below to
activate the presentation mode. In this mode, the
scanner will automatically “see” a barcode and scan
it.
SCAN MODE
SUFFIXES
INTERFACE PROGRAMMING
RESET DEFAULTS
CODE ID PREFIX
MOBILE PHONE READ MODE
Turn the computer
ON
.
www.pos-x.com | 360.738.8433 | [email protected]
POINT OF SALE SIMPLIFIED
QUICKSTART GUIDE
EVO 2D BARCODE SCANNER
EVO-SG1-AD
Download the full owner’s manual:
www.pos-x.com/downloads
document version 1.0