Portwell RUBY-D812-Q470E, User Manual, Page: 95 / 103

RUBY-D812-Q470E
Copyright © Portwell 2021 RUBY-D812-Q470E User's Guide 95
Serial ATA
Unlike IDE bus, each Serial ATA channel can only connect to one SATA hard disk at a time;
The installation of Serial ATA is simpler and easier than IDE, because SATA hard disk doesn’t require setting up Master and S lave, which can reduce mistake of
hardware installation.
RUBY-D812 can support six SATA interface (SATAIII, 6.0Gb/s) on board. It has SATA ports on board.
8.2 BIOS Setting
It is assumed that users have correctly adopted modules and connected all the devices cables required before turning on ATX power. DDR4 UB-DIMM Memory,
keyboard, mouse, SATA hard disk, VGA connector, power cable of the device, ATX accessories are good examples that deserve attention. With no assurance of
properly and correctly accommodating these modules and devices, it is very possible to encounter system failures that result in malfunction of any device.
To make sure that you have a successful start with RUBY-D812, it is recommended, when going with the boot-
up sequence, to hit “delete ” or ” Esc” key and
enter the BIOS setup menu to tune up a stable BIOS configuration so that you can wake up your system far well.