RUBY-D718VG2AR
Copyright © Portwell 2016 RUBY-D718VG2AR
User's Guide
15
4.2
Jumpers Settings
For users to customize RUBY-D718VG2AR‘s features. In the following sections,
Short
means covering a jumper cap over jumper pins;
Open
or
N/C
(Not
Connected) means removing a jumper cap from jumper pins. Users can refer to Figure 1 for the Jumper allocations.
Jumper Table
The jumper settings are schematically depicted in this manual as follows:
Jump Function List:
Jump
Function
Remark
JP1
AT /ATX Mode Select Jumper
JP2
RI Function Select Jumper
COM2
JP3
RI Function Select Jumper
COM1
JP5
CMOS Clear Jumper
JP6
CFEX/SATA Port Select
J34/J28
JP1: AT/ATX Mode Selection
PIN No.
Signal Description
1-2, Short
AT
2-3, Short
ATX
