System Installation
ROBO-8714VG2A User’s Manual
3-4
3.4
Installing the Single Board Computer
To install your ROBO-8714VG2A into standard chassis or proprietary environment,
you need to perform the following:
Step 1 : Check all jumpers setting on proper position
Step 2 : Install and configure CPU and memory module on right position
Step 3 : Place ROBO-8714VG2A into the dedicated position in your system
Step 4 : Attach cables to existing peripheral devices and secure it
WARNING
Please ensure that your SBC is properly inserted and fixed by mechanism.
Otherwise, the system might be unstable or do not work due to bad contact of
PICMG 1.0 External Bus supports up to 64-bit/66MHz PCI-X plus ISA-bus slot.
Note:
Please refer to section 3.4.1 to 3.4.5 to install INF/VGA/LAN/Audio/USB 2.0
drivers.