PIMB-09082
User Manual
PIMB-
09082 User’s Manual
14
4.2.
Rear Panel Connectors
Audio 2, 4, 5.1 or 7.1-channel configuration
Note: Use a chassis with HD audio module in the front panel to support a 7.1-channel audio output
PS/2
This Port is for PS/2 Mouse & keyboards
COM 2 & COM
1
RS232/RS422/RS485 ports connect modems, or other devices that conform serial specification
VGA
This 15-Pin port for VGA monitor or other VGA compatible devices
LAN (RJ45)
These ports allow gigabit connection to Local Area Network through network hub
LAN LEDs
Activity/ Link LED: Off=
no link
, Orange=
Linked
, orange blink=
data activity
, orange blink then
steady=
Ready to wake up from S3 mode
Speed LED: Off=
10Mbps connection
, Orange=
100Mbps connection
, Green=
1Gbps connection
Line In
This port connects to the tape CD/DVD or other audio sources
Line Out
This port connects headphone or speaker. In the 4.1 & 5.1 channels config, the function of this port
becomes front speaker out
Mic
This connects to microphone
USB 3.2 Gen 1
These 9-pin USB up to 5Gbps ports are for USB 3.2 gen 1 devices
HDMI
This port is for a High-Definition Multimedia Interface (HDMITM) connector, and is HDCP compliant
allowing playback of HD DVD, Blu-ray, and other protected content
Port
Headset-2 Channel
4-Channel
5.1-Channel
7.1 Channel
Light Blue (Rear panel) Line In
Rear Speaker Out
Rear Speaker out
Rear Speaker Out
Lime (Rear panel)
Line Out
Front Speaker Out
Front Speaker Out
Front Speaker Out
Pink (Rear panel)
Mic In
Mic-In
Bass/Center
Bass/Center
Lime (Front panel)
-
Side Speaker Out
