System Installation
PEB-2739I User’s Manual
3-2
3.3 System
Architecture
To install your PEB-2739I into standard chassis or proprietary environment, please
perform the following:
Step 1 : Check all jumpers setting on proper position
Step 2 : Install and configure CPU and memory module on right position
Step 3 : Place PEB-2739I into the dedicated position in the system
Step 4 : Attach cables to existing peripheral devices and secure it
WARNING
Please ensure that SBC is properly inserted and fixed by mechanism.
Note:
Please refer to section 3.3.1 to 3.3.7 to install INF/VGA/LAN/Audio drivers.
3.3.1 Mechanical
Drawing
PEB-2739I uses state-of-art Intel® Z510 CPU. It’s a new chipset that some old
operating systems might not be able to recognize. To overcome this compatibility
issue, for Windows Operating Systems such as Windows XP/Vista/Win7, please
install its INF before any of other Drivers are installed. You can find very easily this
chipset component driver in PEB-2739I CD-title.
3.3.2
Intel Integrated Graphics GMCH Chip
PEB-2739I uses Intel GMA500 integrated graphic chipset to gain an outstanding
graphic performance. Shared 8 accompany it to 128MB system DDR2-SODIMM with
Total Graphics Memory. PEB-2739I supports VGA, LVDS dual display. This
combination makes PEB-2739I an excellent piece of multimedia hardware.
With no additional video adaptor, this onboard video will usually be the system
display output. By adjusting the BIOS setting to disable on-board VGA, an add-on
PCI-Express by 1 VGA card can take over the system display.
Drivers Support
Please find all the drivers in the PEB-2739I CD-title. Drivers support , Windows
XP/Vista/Win7.
3.3.3
Intel Gigabit Ethernet Controller
Drivers Support
Please find INTEL 82574IT LAN driver in /Ethernet directory of PEB-2739I CD-title.
The drivers support Windows XP/Vista/Win7.