Portwell NANO-6062, User Manual

Page: 89 / 93

NANO-6062
Copyright © Portwell 2017 NANO-6062 User's Guide 89
8.2 BIOS Setting
It is assumed that users have correctly adopted modules and connected all the devices cables required before turning on ATX power.
204-pin DDR3L 1333/1600/1866 MHz
SO-DIMM Memory, keyboard, mouse, SATA hard disk, VGA connector, device power cables, ATX accessories are good
examples that deserve attention. With no assurance of properly and correctly accommodating these modules and devices, it is very possible to encounter
system failures that result in malfunction of any device.
To make sure that you have a successful start with NANO-6062, it is recommended, when going with the boot-up sequence, to hit “F2” key and enter the BIOS
setup menu to tune up a stable BIOS configuration so that you can wake up your system far well.
Loading the default optimal setting
When prompted with the main setup menu, please scroll down to “Restore Defaults”, press “Enter” and select “Yes” to load default
optimal BIOS setup. This will force your BIOS setting back to the initial factory configurations. It is recommended to do this so you can be
sure the system is running with the BIOS setting that Portwell has highly endorsed. As a matter of fact, users can load the default BIOS
setting at any time when system appears to be unstable in boot up sequence.
8.3 FAQ
Information & Support