
This package includes:
• Lantern
• Easy to use Universal Mounting Bracket
• Mounting Hardware
• Wire Connectors
• Some Models Include an Optional Decora-
tive Tail Assembly
Requirements
• The Light Control requires 120 volts AC.
• If you want to use Manual Mode, the control
must be wired through a switch.
•
Some codes require installation by a
qualified electrician.
Features
• Light comes on when motion is detected.
• Automatically turns light off.
• Dusk Accent lighting.
• Photocell keeps the light off during daylight
hours.
© 2006 DESA Specialty Products™
598-1166-02
MANUAL MODE
ON-TIME Switch at 1,
5, or 10 minutes
... back on.
1 Second
OFF t
hen...
Mode Switching Summary
Flip light switch
off for one sec-
ond then back
on*
* If you get confused while switching modes, turn
the power off for 1
1
/
2
minutes, then back on.
After the calibration time the control will be in the
AUTO mode.
MANUAL MODE
AUTO
TEST
OPERATION
* resets to Auto Mode at dawn.
TEST
TEST 1 5 10 MIN
AUTO
TEST
1 5 10 MIN
D
ual
B
rite
®
Dimmer Control
Light comes on dim for selected time after
dusk (Off, 3 hr., 6 hr., until dawn). If motion
is sensed, the light turns on full bright for
the ON-TIME (1, 5, or 10 minutes) then
returns to dim mode.
D
ual
B
rite
®
Motion Sensing
Coach Light
Set the ON-TIME switch
on the bottom of the cover
plate to TEST and the D
u
-
al
B
rite
®
switch OFF.
Set ON-TIME switch to
1, 5, or 10 minutes.
Manual mode only works at
night because daylight re-
turns the sensor to AUTO.
Flip the light switch off for
one second then back on to
toggle between AUTO and
MANUAL MODE.
Manual mode works only with
the ON-TIME switch in the 1,
5, or 10 position.
Before installation, record the model
number from back of fixture below.
Attach receipt in case of possible war-
ranty issues.
Mode:
On-Time
Works: Day Night
Test
5 Seconds
x
x
Auto
1, 5, or 10 Min
x
Manual
To Dawn*
x
Accent 3, 6 Hr, to Dawn
x
Note: When first turned on wait about 1
1
/
2
minutes for the circuitry to calibrate.