2
Shown below is a sample of the programming steps for individual versus multiple operation of four backstops.
Individual Operation (Backstops 3 thru 6
Operate Individually)
Example No. 1:
To program
Backstop 3
to
RELAY SET B
(002) on panel
address
"0"
:
1. Enter the relay set number:
002
2. Press the device type:
Backstop
3. Enter the device number:
03
4. Press
the
DOWN / Off
button.
Example No. 2:
To program
Backstop 4
to
RELAY SET E
(005) on panel
address
"0"
:
1. Enter the relay set number:
005
2. Press the device type:
Backstop
3. Enter the device number:
04
4. Press
the
DOWN / Off
button.
Example No. 3:
To program
Backstop 5
to
RELAY SET A
(009) on panel
address
"1"
:
1. Enter the relay set number:
009
2. Press the device type:
Backstop
3. Enter the device number:
05
4. Press
the
DOWN / Off
button.
Example No. 4:
To program
Backstop 6
to
RELAY SET G
(015) on panel
address
"1"
:
1. Enter the relay set number:
015
2. Press the device type:
Backstop
3. Enter the device number:
06
4. Press
the
DOWN / Off
button.
Multiple Operation (Backstops 3 thru 6 Operate
Simultaneously)
Example No. 1:
To program
Backstop 3
to
RELAY SET B
(002) on panel
address
"0"
:
1. Enter the relay set number:
002
2. Press the device type:
Backstop
3. Enter the device number:
60
4. Press
the
DOWN / Off
button.
Example No. 2:
To program
Backstop 4
to
RELAY SET E
(005) on panel
address
"0"
:
1. Enter the relay set number:
005
2. Press the device type:
Backstop
3. Enter the device number:
60
4. Press
the
DOWN / Off
button.
Example No. 3:
To program
Backstop 5
to
RELAY SET A
(009) on panel
address
"1"
:
1. Enter the relay set number:
009
2. Press the device type:
Backstop
3. Enter the device number:
60
4. Press
the
DOWN / Off
button.
Example No. 4:
To program
Backstop 6
to
RELAY SET G
(015) on panel
address
"1"
:
1. Enter the relay set number:
015
2. Press the device type:
Backstop
3. Enter the device number:
60
4. Press
the
DOWN / Off
button.
In the above individual and multiple programming examples, Backstops 3, 4, 5 or 6 will operate individually when the operator at the
TouchPad enters
Backstop 3, 4, 5 or 6
and presses and holds either the
UP
or
DOWN
button. These four backstops will operate
simultaneously when the operator at the TouchPad enters
Backstop 60
and presses and holds either the
UP
or
DOWN
button.
Multiple Operation
notes:
•
A maximum of four (4) backstops or height adjusters can be operated simultaneously (multiple operation).
•
Each member of a multiple operation set must be powered by a separate relay bank (see pages 11, 16 and 17 of the manual).
•
Any device number can be assigned to operate a multiple operation set, but number assignments 50 thru 99 are
recommended.
•
Only the
Backstop
and
MISC.
function keys can be programmed for multiple operation. The
Curtain
function key
cannot
be programmed for multiple operation.
•
A Powr-Touch
®
II system with only one relay panel can control only two devices simultaneously. A minimum of two relay
panels is required to control a multiple set of four devices.