3
Bottom end of post is
suspended in hole for
concrete footing
Suspend pre-assembled
soccer goal in holes for
footings, by clamping 2x4's,
etc. to post as shown. The
bottom of the crossbar must
be located at the exact
dimension above the playing
surface as shown at right, with
the face of the goal even with
the outer edge of the courtline
(See also Detail "C").
See Detail "C"
6'
A
4414061
9'
4414091
12'
4416121
18'-6"
4416181
21'
4417211
GOAL
No.
Detail "B"
IN-GROUND / SLEEVE-TYPE SOCCER GOALS
1.
Soccer goals will be pre-assembled on the ground, before being installed in the concrete footings. See Detail "A" for
assembly details.
If soccer goals are being used with outdoor ground sleeves, follow the installation instructions provided with the ground
sleeves. If soccer goals are being installed permanently into concrete footings, proceed to Step No. 2.
2.
Locate and dig footings for sideframes. CAUTION – Contact your local utility companies to locate buried electrical,
gas and water lines before digging holes for footings. Also, check for overhead utilities. See Detail “C”.
3.
Raise the assembled soccer goal into position, with the bottom end of the posts suspended in the holes for the
footings. Support the goal assembly at the proper location and height, with 2x4’s, etc. The bottom of the crossbar
must be located at the exact dimension above the playing surface, with the face of the goal even with the outer edge
of the court line. See chart in Detail “B”. See Detail "C".
4.
After double-checking the position of the soccer goal, pour the concrete footings.
5.
Allow the concrete footings to cure for a minimum of
three days before assembling soccer net to goal
with cable ties provided (not shown).
6.
Soccer goal is now ready for use.
Detail
"A"
POST & CROSSBAR
ASSEMBLY
2
1
4
3
Locate all
attachment
hardware toward
the rear of the goal
1
2
In-Ground/Sleeve-Type
Goals
3