background image

15- ENG

D27243

Note 1:

Change oil after first two (2) operating hours and every 50 operating

hours thereafter, more often if operated in extreme dusty or dirty conditions.

Note 2:

Check oil after 5 hours of operation.

CUSTOMER RESPONSIBILITIES TABLE

MAINTENANCE TASK

Before

each

use

Every 25

Hours of

Every

Season

Every 50

Hours of

Every

Season

Every 100

Hours of

Every

Season

Check Spark Plug

Prepare unit for storage if it is to remain
idle for more than 30 days.

MAINTENANCE

Check oil level

Change oil

Clean Air Filter Assembly

Prepare Unit for Storage

See Note 2

X

See Note 1

X

X

X

GENERAL RECOMMENDATIONS

The warranty of the generator does not cover items that have been subjected to
operator abuse or negligence.  To receive full value from the warranty, operator
must maintain the generator as instructed in this manual.

ENGINE MAINTENANCE

Refer to the Engine Operator's manual for service and maintenance of the
engine.

GENERATOR MAINTENANCE

Your generator should be kept clean and dry at all times.  The generator should
not be stored or operated in environments that includes excessive moisture,
dust or any corrosive vapors. If these substances are on the generator, clean
with a cloth or soft bristle brush. Do not use a garden hose or anything with
water pressure to clean the generator.  Water may enter the cooling air slots and
could possibly damage the rotor, stator and the internal windings of the gen
head.

Summary of Contents for D27243-028-0























Reviews: