10
Assembly
!
Initial Assembly and Bench Mounting
!
Assembly and mounting must be performed with the
sharpener unplugged!
Always unplug the sharpener before doing any work on
it (cleaning, disc replacement, etc.)
The sharpener is delivered assembled. Carefully cut the
cable tie that is used to compress the unit in the box
The sharpener is designed to be bench mounted.
1. When installing it on a bench, place the sharpener
on the edge of the bench to the stop and bolt it to the
worktop using the holes in the base.
2. Fit the handle to the grinding wheel casing by sliding
the nut into the slot and then tightening the handle.
Ultra Mk4 instructions v2.indd 10
Ultra Mk4 instructions v2.indd 10
06/11/2020 15:13
06/11/2020 15:13
