1000R-LF
Lithium Battery Powerpack
User Manual
1. Charging your product
1.1 Charging with the AC adapter
1.2 Charging via DC socket In-Vehicle
1.3 Charging via Solar
1.4 Charging Notes
2. Using Your Product
2.1 Display
2.2 LCD Panel Overview
2.3 Buttons and Functions
A.
Power On / Off
B.
AC On / Off
C.
LED Torch On / Off
D.
USB Output On / Off
E.
DC Output On / Off (12V / 24V)
2.3 Automatic Shutdown Mode
3. Product Specification
3.1 Battery Information
3.2 Output
3.3 Charging
3.4 General Information
4. Caution Advice
5. Contact information
6. Fault Diagnostics
7. Warranty Service
A
.
Please read this manual carefully before using the device.
Ver 1.1
Thank you for choosing the Powerpack 1000R-LF
This product is a portable powerpack with power inverter and internal lithium battery which can be
charged quickly by both AC and DC power. Please read the manual carefully and follow the guidance
This product should not be disposed along with household waste.
Please dispose or recycle this product and battery in the appropriate way.
For more advice on battery disposal or recycling please visit recycle now for more information;
https://www.recyclenow.com/what-to-do-with/batteries-1
https://www.recyclenow.com/what-to-do-with/electrical-items-0
1.1 Charging with the AC Adapter.
Connect your external AC charger to a 230V socket and connect the DC output port of the charger
into the DC port on the front of the powerpack marked “Input”. The powerpack will now turn of if it
was not already and you will see a segment on the blue battery Icon on the LCD flash intermittently
Charging wattage is displayed on the left of the LCD panel. Fully charged in aproximately 7-8 hours.
1.2 Charging via DC Socket In-Vehicle
First plug the DC car charger into the DC socket of your vehicle. (Suitable for both 12V and 24V)
Then plug the smaller DC port from the charger cable into the “Input” DC port on the powerpack.
Charging is indicated by the blue battery icon on the LCD screen. Charging may fluctuate with
vehicles with standard alternators. The DC car charger has a built in 10A protector to ensure safety.
Warning:
Charging the powerpack in-vehicle may deplete your starter battery if your vehicle engine is not on.
1.3 Charging via Solar through built in MPPT
The 1000R comes complete with a built in MPPT controller, making charging via solar panel easy.
Simply connect your 12V or 24V solar array (Max 240W / Max 8A) to the MC4 solar cable provided.
Connect the male MC4 connector from the solar cable to the female connector from your solar array.
Then connect the male from your solar array into the female MC4 connector on your solar cable.
Finally plug the DC port on the other end of the solar cable into the INPUT DC port on the powerpack.
1.4 Charging Notes
Optimal charging temperature
The powerpack cannot be charged if the internal temperature is lower than 0°C or higher than 55°C
Charging voltage protection
The powerpack can only be charged while the internal battery is between 17.6V - 30V
Charging over-current protection
The powerpack can only be charged at a maximum of 8A.
2.1 Display
The powerpack will automatically turn off after 5 minutes of no operation if the powerpack is not being
charged, or if there is no load connected, providing the AC, DC and USB functions are off.
When charging, the INPUT icon on the LCD is illuminated. The battery symbol will flicker to display
the charging process and will present a completed battery without flickering once fully charged.
The percentage next to the battery icon shows the battery’s current power.
When the DC or USB is on, the LCD will show “DC ON” underneath the OUTPUT icon.
This shows 12V and 24V icons when the DC is active, or displays DC ON if only the USB is active.
50HZ is displayed on the far right when the powerpack is turned on but disappears after 5 seconds.
2.2 LCD Panel Overview
Introduction
Disposal and Recycle
1. Charging Your Product
List of contents
2. Using Your Product
A
B
C
D
E
H
I
J
F
G
A. INPUT Icon
B. Charging wattage
C. Battery Indicator Icon
D. Battery power percentage
E. OUTPUT Icon
F. DC On / Off Indicator
G. AC On / Off Indicator
H. 12V / 24V Active Indicator
I.
DC Power Consumption
J. AC Power Consumption
Cold Weather Warning
Cold temperatures (-20, -60
°
C) can affect the products battery capacity and lifetime.
If you’ll be living off grid in sub-zero conditions, it is recommended to keep your product insulated and
connected to a power source. (Car charger / AC Adapter / solar panel).
The natural heat generated by the product contained in an insulated cooler will keep battery capacity at its
highest level.
