A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
193
Inserting an SD card
NOTICE
Risk of damage to the PCM due to incorrect use of
SD cards.
If you are using SD adapter cards, there is a risk of
the SD card falling out of the adapter due to vibra-
tion, so that the individual components of the card
may remain stuck in the SD card reader.
e
Only use single-component SD cards.
1.
Insert the SD card
B
into the SD card reader 1
or 2
A
with the printed side facing upward until
it engages.
2.
Press button
and select the de-
sired media source.
Removing an SD card
e
Press on the inserted SD card
B
and remove it.
Inserting a CD/DVD
NOTICE
Risk of damage to the PCM if CDs/DVDs are not
used properly.
e
Only use standard circular CDs/DVDs with a di-
ameter of 12 cm.
e
Only hold CDs/DVDs by the edges. Do not
touch the unprinted side.
e
Keep the CDs/DVDs clean and clean them if
necessary.
e
Never stick anything to the CD/DVD.
e
Do not bend CDs/DVDs.
e
Do not force CDs/DVDs into or out of the drive.
1.
Push the CD/DVD
D
into slot
E
with the labeled
side facing upward until it is automatically
pulled in.
2.
Press button
and select the de-
sired media source.
Removing a CD/DVD
e
Press the
button and remove the CD/DVD.
Using the DVD changer in the lug-
gage compartment
Fig. 139: DVD changer
A
CD/DVD slot
B
CD/DVD load button
C
CD/DVD position button
CAUTION
Risk of injury
Danger from invisible laser radiation if the housing
is opened or is damaged. The PCM is a Class 1
laser product.
e
Do not open the housing. Any maintenance
work required must be performed exclusively
by qualified customer service specialists.
Inserting and loading a CD/DVD
NOTICE
Risk of damage to the PCM if CDs/DVDs are not
used properly.
e
Only use standard circular CDs/DVDs with a di-
ameter of 12 cm.
e
Only hold CDs/DVDs by the edges. Do not
touch the unprinted side.
e
Keep the CDs/DVDs clean and clean them if
necessary.
e
Never stick anything to the CD/DVD.
e
Do not bend CDs/DVDs.
e
Do not force CDs/DVDs into or out of the drive.
1.
Press the CD/DVD load button
B
.
As soon as a CD/DVD can be loaded, the light
indicator in the CD/DVD slot
A
flashes green. If
the CD/DVD changer is not ready, the light in-
dicator in the CD/DVD slot
A
lights up red.
2.
Insert the CD/DVD with the labeled side facing
up into CD/DVD slot
A
until it is automatically
pulled in.
The CD/DVD is automatically loaded in the first
available position. The light indicator of the rel-
evant position button
C
flashes.
– or –
To load the CD/DVD in a particular position,
press the relevant position button
C
and push
the CD/DVD into the CD/DVD slot
A
.
Removing a CD/DVD
1.
Press button
.
2.
Press the button of the CD/DVD to be ejected.
3.
Remove CD/DVD.
4.
To eject all CDs/DVDs, press button
and
keep it pressed for approx. 3 seconds.
