27
Operating
Open mode
The charger is configured to open mode upon deliv-
ery. The energy manager is therefore detected and
connected in the home network automatically. For
automatic pairing with the energy manager, the fol-
lowing conditions must be satisfied:
b
ENERGY MANAGER
charge status has been se-
lected on the charger.
b
The charger and energy manager are located in
the same PLC network.
b
The charger has been added as an EEBus device
in the Web Application of the energy manager.
e
We recommend switching to private mode after
you have operated the charger for the first time.
Activating private mode
1.
Navigate to
Connections
e
Energy manager
in
the Web Application.
2.
Activate
Secure mode
.
Confirming the connection to the energy manager
b
The charger and energy manager are in the same
network.
b
Private mode is activated.
b
The connection to the charger has already been
confirmed in the web application of the energy
manager.
1.
In the Web Application of the charger, navigate
to
Connections
e
Energy manager
.
🡆
The energy manager is shown in the
Availa-
ble energy managers
list.
2.
Select and expand the energy manager.
3.
Select
Pair device
.
4.
In the
Establish connection
dialogue box, check
the identity of the energy manager once more
using the ID number (SKI), then select
Connect
.
🡆
The energy manager is successfully connec-
ted and the status
Energy manager connec-
ted
is displayed.
The energy manager settings (e.g. informa-
tion on the charging current, overload pro-
tection and optimised charging) are adopted
by the charger.
Disconnecting from the energy manager
In private mode, the connection to the energy man-
ager can be disconnected in the Web Application of
the charger.
b
Private mode is activated.
1.
In the web application of the charger, navigate to
Connections
e
Energy manager
.
🡆
The connected energy manager is shown in
the
Available energy managers
list.
2.
Select
Disconnect
.
🡆
The charger is disconnected from the en-
ergy manager.
Settings
System
Changing the password
You can change the login password for the Web
Application. The new, chosen password overwrites
the initial password from the letter containing access
data.
e
Select
Change
and enter a new password.
Entering language and country
Field
Explanation
Language
Selects the language
for the Web Applica-
tion.
Country
The country of use. The
configuration settings
vary depending on the
country. If you enter
a country that is not
the actual place of use,
some settings may not
be available.
Controlling energy consumption
Activate standby mode to save electricity.
If standby mode is activated and then there is no
further use via the charger or the Web Application,
after 10 minutes the charger switches to standby
mode. The charger can then no longer be accessed
via the Web Application.
e
Activate the
Standby mode
function.
The device needs some time to exit standby
mode and become ready to use once more.
Information
The charger automatically switches to standby mode
after a longer period of inactivity. Press the Power
button to start it up again.
