Porsche 996 TT, Repair Manual

Page: 248 / 2099

Safety instructions for fuel tank
CAUTION
Danger of fire due to fuel tank or fuel−carrying parts heating up during grinding and welding work!
When carrying out grinding and welding work near the fuel tank or fuel−carrying parts, make sure
that these parts do not heat up! •
It is recommended to remove endangered parts! •
Cover the welding area comprehensively with fire−proof covers! •
Safety instructions for air conditioning
CAUTION
Danger of injury due to the filled air−conditioning system bursting during welding and soldering work!
In the case of extreme heating of filled air−conditioning systems, a very strong overpressure may be
caused in the system which may lead to an explosion. •
No welding, soldering or hot−air heating may take place on parts of the filled air−conditioning
system! •
While drying after painting work, the temperature burden on the vehicle must not exceed two hours at
a maximum temperature of 80 °C! •
Make sure that parts of the air−conditioning system do not heat up during welding or soldering work
on the vehicle! •
top of page
Safety instructions for sticking
Safety instructions for Teromix−6700 two−component adhesive
CAUTION
Danger of damage to side section if binding time of adhesive is not observed!
The new part must be welded in within 30 minutes! •
top of page
einordnung
Safety instructions for fuel tank 185