Porsche 996 TT, Repair Manual

Page: 1965 / 2099

1. Unclip the B−plus cable from the holder −A− (only the right
side).
2. Uncouple drive shaft on the transmission side. Unscrew the hexagon socket head bolts
−B− .
3. Unscrew the fastening screw between the halfshaft flange and the transmission.
4. Unscrew the halfshaft flange out of the transmission past the drive
shaft.
5. Lever out sealing ring using a suitable tool.
top of page
Installing sealing ring for halfshaft flange
1. Fill the space between the dust and sealing lips with grease (e.g. Liqui−Moly) and drive in the sealing ring
up to the mounting face with special tool pressure piece 9252 .
2. Push in the halfshaft flange and tighten the fastening screw. If necessary, hold the halfshaft flange with 2
screws.
Tightening torque: 44 Nm (32 ftlbs.).
3. Fitting the halfshaft flange on drive shaft
Tightening torque: 81 Nm (61 ftlb.).
4. Clip in the B−plus cable in the holder (only the right side).
einordnung
Removing sealing ring for halfshaft flange 1902