Porsche 996 TT, Repair Manual

Page: 1768 / 2099

−b− Push plug for seat heating element onto −B− until the plug connection engages.
−C−
Base for seat heating control module.
−D− Connection for seat heating wiring harness for the central
plug.
−E−
Power supply, plug for central plug.
top of page
Central plug
−A−
Coding pin: In the Boxster in opening 2, in the 911 Carrera and 911 Turbo in opening 5. Pin BR
opening 6, pin RE/VI opening 3.
−B− Slide in lock−in position.
1. Removing coding pin and pin
=> Removing
front seat
a. Pull slide −B− in −direction of arrow 1−
.
b. Lever out fuse −arrow 2− with a small screwdriver and remove
completely.
c. Pull out coding pin −A− with pliers. Press pin out of flat connector using press−out tool. => Tools
3. Removing coding pin and pin
a. Insert coding pin −A− and pin into the flat connector until it
engages.
b. Insert fuse −2− in −direction of arrow− until it
engages.
c. For seat installation: Insert counter plug into vehicle and push in slide −B−
.
top of page
Removing and installing pin housing for seat heating and belt
buckle
−C− Seat heating pin
housing
−D−
Belt buckle pin
housing
einordnung
Seat heating line route 1705