Porsche 996 TT, Repair Manual

Page: 1108 / 2099

In the case of door sealing films which have become partly detached at the top and side, the detached films
must be reattached using a butyl sealing cord.
Beside the original point of attachment, attach a butyl cord −2− to the area where the door sealing film
−1−
is detached, and firmly affix.
=> Materials and tools
top of page
Fitting sliding strip on the inner door panel
A sliding strip must be stuck onto the front and rear sides of the inner door panel in order to prevent creaking
noises from the door area.
1. Sticking sliding strip onto the front of the inner door panel
Remove backing film from the sliding strip and stick the strip onto the front of the inner door
panel −arrow− . Start at the top (top edge of inner door panel) and follow the curvature.
einordnung
Notes on the installation of partly detached door sealing films 1045