Porsche 996 TT, Repair Manual

Page: 1012 / 2099

Removing the heat shield
Unscrew collar nuts −1− and fastening screw −11− , remove the frame with heat shield
−27−
.
Installing the heat shield
Position the frame with the heat shield −27− so that the clearance rib −arrow− rests against the
retaining strip without gaps. Tighten the collar nuts −1− and fastening screw −11− .
top of page
Tightening torques
Location Illustration Thread Tightening torque
Fastening screws of impact pipe on body −21− M8 23 Nm (17 ftlb.)
Fastening screws of rear supports on rear bumper −12− M6 10 Nm (7.5 ftlb.)
Fastening screws of bumper on impact pipes −10− 85 Nm (63 ftlb.)
996420, 996421, 996450, 996451, 996840, 996841, 996430, 996431
einordnung
Removing and installing frame with heat shield 949