Porsche 911 GT3 Cup MR Gen. II, Technical Manual

Page: 42 / 120

42 Version V2, 08/2020 Porsche 911 GT3 Cup MR Gen.II
Home
BODY EXTERIOR | Service Intervals
5.1 Service Intervals
Part Service interval Max. runtime Service advice
Air jack system Before every session -
Check for leaks and damage to lines and
air jacks. Check that the lair jacks are
firmly seated in the body mounts. Check
the front air jack seats for firm seating
and cracks.
Air jacks 2,000 strokes / 2 years
-
Revision of the air jacks by the manufac-
turer. Check the jacks for damage every
time the vehicle is serviced and maintain
with silicone spray.
Lock pins Before every session -
Check for tightness and damage. Replace
if necessary.
Aerocatch fasteners and retaining tabs on
boot lid and front front covering
Before every session -
Check for tightness and damage .Replace
if necessary.
Heat protection insulation Before every session -
Check the heat protection insulation on
the diffuser and rear panel for damage,
repair if necessary.
Fiber composite parts Before every session
Visually inspect fiber composite compo-
nents for structural damage before each
session.