Porsche 911 2020, Owner'S Manual

Page: 202 / 360

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Porsche Communication Management (PCM)
200
G – Options and most important settings for
each menu item
H – Connection and status symbols
e.g. display of different functions as well as temper-
ature or time. Tap to open the quick selection.
I – Info widget
When is opened, the factory set and individually
set functions are displayed. Swipe vertically to
change Info widget.
Content from different categories can be individually
grouped in tiles. A tile contains either a direct jump
to the relevant menu or direct access to a function.
Several different layouts can be configured. Please
see chapter "Home screen and Info widget" on
page 202.
Important information for users
The Porsche Communication Management system
(PCM) is the central control unit. To protect the
battery, the PCM switches off automatically a few
minutes after the ignition is switched off.
For safety reasons, some functions are only available
when the vehicle is stationary.
WARNING
Configuring settings and
operating while driving
Configuring settings and operating the multifunction
steering wheel, infotainment system, etc. while
driving can distract you from the traffic. You may
lose control of the vehicle.
e Only operate these components while driving if
the traffic situation allows.
e If in doubt, stop in a safe place and only carry out
extensive operations and settings while the ve-
hicle is at a standstill.
Operating the touch display
Fig. 148: Operating the touch display
A – Tap (select)
Briefly press the touch display with your finger. Ex-
ample: select function or activate/deactivate
checkbox.
B – Long press
Press the touch display with your finger for longer.
Example: Save station as a favorite in the Media
main menu.
C – Horizontal swipe
Swipe the touch display horizontally with your finger.
Example: Scroll favorites horizontally.
D – Vertical swipe (scroll and switch)
Swipe over the touch display vertically with one fin-
ger. Example: search through lists manually or
switch the Info widget.
E – Vertical swipe (scroll)
Swipe the touch display vertically using two fingers
to tilt the map in the Navigation main menu.
F – Zoom
Move two fingers further apart or closer together.
Tap the touch display twice to zoom in on a section.
Operate the PCM with rotary push
button and buttons.
Fig. 149: Operating the rotary push button
e Turn the rotary push button A until the desired
function is highlighted.
e Press the rotary push button A to activate the
highlighted function.
e Using button B , jump back one level.
e Using button OPT C , call up most important set-
tings for each menu item.
Opening menus
Open main menu
e
Select menu (e.g. NAV ) in the touch display.
Calling up submenu
e Select menu item (e.g. MAP ) in the touch
display.
Opening settings for each menu item
b b Desired menu is selected.
e Select options .