163
Phone
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Configuring WiFi settings
–
Activate/deactivate WiFi:
Switch WiFi function
of the PCM on/off.
–
Configure WiFi hotspot in PCM:
Display and set
up the PCM’s WiFi access data. These data are
required to connect a device (e.g. mobile phone)
to the PCM or WiFi and to use the PCM’s WiFi
hotspot.
–
Use external data connection:
To establish a data
connection with an external WiFi hotspot (e.g.
public hotspot).
–
Connect to WiFi hotspot:
Search for new WiFi
hotspot and enter the access data for the hotspot
(user name and password). Be aware of upper and
lower case when entering the data.
f
Please see chapter „Connectivity“ on
page 74.
Deleting external WiFi hotspot
Configuring data connections
–
Data connections:
–
On:
Data connections are always approved.
–
Off:
Data connections are switched off.
–
Prompt:
Before using the data connection, a
message appears as to whether the data
connection should be approved.
–
Share data connection:
Approve data connection
for WiFi devices.
–
Roaming:
Allow or block data connections in
external networks.
–
Configure APN:
Change network access data for
the SIM card data connection (APN name, user
name and password).
–
Reset access point configuration:
Reset APN
settings to factory settings.
f
For information on APN settings: Please see
chapter „Establishing a data connection via an
external SIM card“ on page 74.
Managing contacts
–
Contact memory:
Display the used contact
memory.
–
Sort criteria:
Sort the contacts stored in the
mobile phone by first name or by last name.
–
Sync contacts
: Contacts from the SIM card or the
mobile phone connected via Bluetooth® can be
transferred to the PCM manually.
Changing tone settings
b
The mobile phone is connected with the PCM.
Available settings are:
–
Select ringtone:
Set the PCM ringtone if the
ringtone is not transferred to the connected
mobile phone via Bluetooth®.
–
Ringtone volume:
Setting the ringtone volume.
–
Microphone sensitivity:
Set microphone sensi-
tivity for phone calls.
–
Alert tone for messages:
Setting or disabling the
alert tone for incoming messages.
1.
button
e
button
e
SET PHONE
e
WiFi settings
2.
Selected the desired setting:
1.
button
e
button
e
Connections
e
Data connection
2.
Select the icon
of the WiFi hotspot to be
deleted.
1.
button
e
button
e
SET PHONE
e
Data connections
2.
Selected the desired setting:
1.
button
e
button
e
SET PHONE
e
Contacts
2.
Selected the desired setting:
1.
button
e
button
e
SET PHONE
e
Tone settings
2.
Selected the desired setting:
21_718_GT4_Spyder_BAL_21_WKD 982 02 21 21_KW36.20-24.21_en_US.book Seite 163 Freitag, 24. Juli 2020 11:31 11
