Quickstart
This is a
for . You must not move the
rocker arm manually without unlocking it
mechanically pulling on the ring on the bottom side
of the enclosure.
What is Z-Wave?
Z-Wave is the international wireless protocol for
communication in the Smart Home. This device is suited for
use in the region mentioned in the Quickstart section.
Z-Wave
ensures
a
reliable
communication by reconfirming every message (
two-way
communication
) and every mains powered node can act as
a repeater for other nodes (
meshed network
) in case the
receiver is not in direct wireless range of the transmitter.
This device and every other certified Z-Wave device can
be
used together with any other certified Z-Wave device
regardless of brand and origin
as long as both are suited
for the same frequency range.
If a device supports
secure communication
it will
communicate with other devices secure as long as this
device provides the same or a higher level of security.
Otherwise it will automatically turn into a lower level of
security to maintain backward compatibility.
For more information about Z-Wave technology, devices,
white papers etc. please refer to
.
Product Description
The Flow Stop moves the operating handle
of a ball valve allowing to stopping the
flow of gas or water. It can be mounted
non-intrusive on any pipe size between 0.5
and 1.5 inch. This means the original water or gas pipe will not be opened or manipulated and it is
possible to remove the Flow stop again without any damage to the water or gas pipe. Installing the
Flow stop will not tamper or change any security measure applied or your gas or water installation.
The device is equipped with a powerful 12 V motor providing sufficient torque to open or close any
ball valve within 10 seconds. A complete manual operation of the valve remains possible due to the
Secure Flow Stop
SKU: POPE009501
