7
®
BR
AN
D
PAC 540C
®
BR A
ND
SECURE CYCLERS
Water
CYCLER
MeteredPoolPurifier
For better stability, POOL
FROG XL Pro Cyclers may
be mounted on a treated
wood base using
Phillips
pan head screws,
one in
front and one in back of
each Cycler. If you have
questions about stability,
please contact your dealer
or King Technology.
Primer
PVC
Cement
In-line Installation
For pools 7,000 to 40,000 gallons
Do NOT install
POOL FROG XL Pro
Cyclers off-line.
Following Primer directions, brush Primer on the inside of
the adapters and to ends of pipe. Repeat this process with
PVC cement following manufacturer’s directions on that
product.
Measure the distance between
outside adapters and cut out a
section of pipe 3” less than that
dimension.
Allow a minimum of 12” above and on each
side of POOL FROG XL Pro Cyclers to ensure
room for easy replacement of POOL FROG
Mineral Reservoir and POOL FROG Pac.
Insert PVC pipe into adapters
with a twisting action. Hold in
place 5 to 10 seconds to bond.
To prevent damage to heaters or filters, install a
corrosion
resistant check
valve
which will reduce the backflow of
chlorine gas when the Cyclers are turned off.
1.
3.
4.
Install with water flowing
through the minerals
first and then the
chlorine.
2.
Primer
Minerals
Chlorine
TOOLS NEEDED
Hacksaw
MATERIALS NEEDED
Tape
Measure
Primer and PVC
Cement
PV
Cement
Do NOT install in copper pipe if
using POOL FROG Pac as chemical
corrosion may lead to pipe failure.
The POOL FROG XL Pro Cyclers should always be
installed between the filter and pool (or between heater
and pool if applicable). Never install POOL FROG XL Pro
Cyclers before the heater or damage to the heater could
occur.
Install
Measure
