14
POOL FROG Pac is recommended to assure
up to 50% reduction in chlorine use*.
POOL FROG Pac sold separately.
(EPA Reg. No. 53735-2)
Using POOL FROG
Pac
Cut handle from POOL FROG Pac using a PVC
cutting tool.
(KEEP OUT OF REACH OF CHILDREN).
1.
A.
Find the
indent in the
plastic.
B.
Place curved section of tool
around the narrow end of one
pac tower and line up blade
on indent.
PVC
cutting tool
available
at local
hardware
stores.
C.
Squeeze the handles
together. Repeat for other
side.
D.
Make sure the blade comes
straight across on the indent
line for a clean cut.
E.
If openings are pinched
together, open with fingers or
re-cut closer to the colored
screens inside POOL FROG
Pac. Leave at least 1/4” of
plastic to fit into POOL FROG
XL Pro Chlorine Cycler base.
Finished cut ends
Indent in plastic
®
B R A N D
PAC 540C
Avoid a pinched
opening.
A correct
oval opening
Continued to page 15
WARNING
Avoid sparks, smoking, or any open flame near
POOL FROG XL Pro Cyclers or chemicals.
IMPORTANT:
Read the label on the POOL FROG Pac carefully
before using.
DANGER
Never use fast dissolving chlorine tablets, liquid bleach,
or calcium hypochlorite in the POOL FROG XL Pro Cyclers.
Invert POOL FROG Pac and
shake slightly until chlorine
tablets fall into tower areas.
Turn off pump. Turn control dial on POOL FROG XL Pro
Chlorine Cycler to 0. Remove cap from POOL FROG XL
Pro Chlorine Cycler and stand back to let any chlorine
fumes dissipate.
2.
3.
POOL FROG
Pac
towers
POOL FROG
Pac
towers
