Pontiac 2009 Solstice, Owner'S Manual, Page: 90 / 354

Installing the Roof Panel
{
CAUTION:
An improperly attached roof panel may fall into or
fly off the vehicle. You or others could be injured.
After installing the roof panel, always check that it
is firmly attached by pushing up on the underside
of the panel. Check now and then to be sure the
roof panel is firmly in place.
Notice: If you drop or rest a roof panel on its
edges, the roof panel, paint and/or weatherstripping
may be damaged. Always place the roof panel in
the stowage receivers after removing it from
the vehicle.
In most cases, it makes it easier if two people re-install
the roof panel.
1. Park on a level surface and set the parking brake.
Shift an automatic transmission into (P) Park. Shift
a manual transmission into (N) Neutral.
2. Check that the front release latches and the rear
release latch on the vehicle’s roof opening are in
their opened positions before attempting to
install the roof panel.
3. Carefully place the roof panel over the top of the
vehicle.
4. Position the rear edge of the roof panel on the back
of the roof opening. Then align and fit the pins at
the rear of the roof panel. Gently lower the
front edge of the roof panel to the front of the roof
opening.
5. Turn the front release
handles inward so that
they latch to the
closed position.
6. Push up on the handle of the rear roof release
handle to latch its hook in the closed position.
7. Push and pull the roof panel up and down and
side-to-side to ensure the roof panel is securely
installed.
2-36