Pontiac 2009 Solstice Owner'S Manual Download Page 281

Page: 281 / 354

Removal and Installation of the Sealant
Canister

To remove the sealant canister:

1. Unlock the air only hose (F) from the sealant

canister (B) by pulling up on the lever.

2. Pull the air only hose (F) from the sealant

canister (B).

3. Unwrap the sealant/air hose (F) from the

compressor (A).

4. Turn the sealant canister (B) so the inflator filling

hose is aligned with the slot in the compressor.

5. Lift the sealant canister (B) from the compressor

and replace with a new sealant canister. See your
dealer/retailer for more information.

5-79

Summary of Contents for 2009 Solstice



































































































































































































































































































































































Search results

Summary of Contents for 2009 Solstice

Reviews:

Pontiac 2009 Solstice, Owner'S Manual, Page: 281 / 354

Search results

Summary of Contents for 2009 Solstice

Reviews: